710K Backhoe Loader John Deere
- Interim Tier 4 certified engine
- More efficient HVAC system
- Convenient sealed switched module
- Redesigned easier to clean cooling package
- With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
View Current Brochure
This equipment is available for rent.
710K Backhoe Loader John Deere
Engine
Manufacture and Model |
John Deere PowerTech Plus 6068HT079 turbocharged |
Non-Road Emission Standards |
EPA Interim Tier 4/EU Stage IIIB |
Net Peak Power |
130 hp (97 kW) @ 2,000 rpm |
Net Peak Torque |
405 lb. ft. (550 Nm) @ 1,300 rpm |
Displacement |
414 cu. in. (6.8 L) |
Air Cleaner |
Dual-stage dry tube with safety element, evacuator valve |
Electrical System |
12 volt with 120 amp alternator |
Cooling Fan |
Electronically controlled, variable-rate suction type |
Hydraulics
Main Pump |
Pressure compensated load sensing, axial-piston pump |
Pump Flow @ 2,200 rpm
--Backhoe
--Loader |
52 gpm (197 L/m)
52 gpm (197 L/m) |
System Relief Pressure
--Backhoe
--Loader |
3,625 psi (24 993 kPa)
3,625 psi (24 993 kPa) |
Capacities
Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element |
6-micron filtration; 1,000 break-in/service hours |
Cooling System |
35.8 qt. (33.9 L) |
Rear Axle |
17 qt. (16.1 L) |
Engine Oil (including vertical spin-on filter) |
20.6 qt. (19.5 L) |
Torque Converter and Transmission |
16 qt. (15.1 L) |
Fuel Tank |
69 gal. (261.2 L) |
Hydraulic System |
39.6 gal. (149.9 L) |
Hydraulic Reservoir |
12 gal. (45.4 L) |
MFWD Housing
--Axle
--Planetary (each) |
9.5 qt. (9 L)
0.9 qt. (0.8 L) |
Operating Weights
Base Weight (with standard equipment, rollover protective structure, full fuel tank, and 175lb operator) |
23,802 lb (10 796 kg) |
Typically with Cab, MFWD, Extendable Dipperstick, and 1,400lb Counterweight |
26,747 lb (12 132 kg) |

Overall Dimensions
A) Ground Clearance, minimum |
14 in. (356 mm) |
B) Overall Length, transport |
27 ft. 0 in. (8.23 m) |
C) Width Over Tires |
7 ft. 6 in. (2.29 m) |
D) Height to Top of ROPS/Cab |
9 ft. 9 in. (2.97 m) |
E) Length from Axle to Axle
-- Non-Powered Front Axle
-- MFWD Axle |
8 ft. 6 in. (2.58 m)
8 ft. 4 in. (2.55 m) |
Backhoe Dimensions / Performance
Digging Force
-- Bucket Cylinder
-- Crowd Cylinder |
17,000 lb. (75.6 kN)
11,750 lb. (52.3 kN) |
|
|
w/ optional Extendable Dipperstick |
|
w/ Standard Backhoe |
Retracted |
Extended |
F) Loading Height, Truck Loading Position |
14 ft. 3 in. (4.34 m) |
14 ft. 3 in. (4.34 m) |
17 ft. 0 in. (5.18 m) |
G) Reach from Center of Swing Pivot |
22 ft. 6 in. (6.86 m) |
22 ft. 6 in. (6.86 m) |
26 ft. 10 in. (8.19 m) |
H) Reach from Center of Rear Axle |
26 ft. 8 in. (8.13 m) |
26 ft. 8 in. (8.13 m) |
31 ft. 0 in. (9.46 m) |
I) Digging Depth (SAE maximum) |
17 ft. 10 in. (5.44 m) |
17 ft. 10 in. (5.44 m) |
22 ft. 4 in. (6.81 m) |
J) Digging Depth (SAE)
2-ft (610 mm) Flat Bottom
8-ft (2440 mm) Flat Bottom |
17 ft. 9 in. (5.41 m)
17 ft. 0 in. (5.18 m) |
17 ft. 9 in. (5.41 m)
17 ft. 0 in. (5.18 m) |
22 ft. 5 in. (6.83 m)
21 ft. 7 in. (6.85 m) |
K) Stabilizer Width, Transport |
7 ft. 11 in. (2.41 m) |
7 ft. 11 in. (2.41 m) |
7 ft. 11 in. (2.41 m) |
L) Stabilizer Spread, Operating |
13 ft. 1 in. (3.99 m) |
13 ft. 1 in. (3.99 m) |
13 ft. 1 in. (3.99 m) |
M) Stabilizer Overall Width, Operating |
15 ft. 3 in. (4.65 m) |
15 ft. 3 in. (4.65 m) |
15 ft. 3 in. (4.65 m) |
N) Bucket Rotation |
190 deg. |
190 deg. |
190 deg. |
O) Transport Height |
13 ft. 8 in. (4.17 m) |
13 ft. 10 in. (4.22 m) |
13 ft. 10 in. (4.22 m) |