Page header image

220R Loader John Deere

220R Loader

220R Loader John Deere

  • Compatible with 2032R and 2038R tractors
  • Quik-Park™ mounting system for easy on, easy off in minutes
  • Optional single-point hydraulic coupler lets you connect the hydraulics in one click, no fuss and no mess
  • Quik-Change bucket system allows fast attachment changeovers for moving from chore to chore


End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points

Pivot pin
Pivot pin

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.


A nut ensures the pins remain in position.


A lubrication groove provides a path for lubrication.


End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Quik-Park™ loader mounting system

Quik-Park loader mounting system
Quik-Park loader mounting system
Quik-Park loader mounting system
Quik-Park loader mounting system

The 220R Loader is designed for easy removal/mounting to/from the tractor without tools.


The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.


To view a video of how the Quik-Park system works, click here.


NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.


Technical drawing

Technical drawing View diagram      


Model 2032R, 2038R      
Front tire 23x8.50-14 4PR R4      
Rear tire 14-17.5 6PR R4      
Wheelbase 1725 mm
68 in.
Pump capacity 20.2 L/min
5.3 gpm
Rated pressure 17.23 MPa
2499 psi


Leveling configuration Non-Self Leveling      
Bucket used 1450 mm
57 in.
Bucket weight 88 kg
194 lb
Lift capacity at full height Measured at pivot (U)
509 kg
1120 lbMeasured at 500 mm ahead of pivot (V)
365 kg
803 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
589 kg
1296 lbMeasured at 500 mm ahead of pivot (X)
445 kg
979 lb
Boom breakout force Measured at pivot (Y)
886 kgf
1949 lbfMeasured at 500 mm ahead of pivot (Z)
618 kgf
1360 lbf
Bucket rollback force capacity At maximum height (VV)
1044 kgf
2297 lbfAt 59-in. (1500-mm) lift height (XX)
1302 kgf
2864 lbfAt ground-level line (ZZ)
972 kgf
2138 lbf
Dimensions Maximum lift height (A)
2160 mm
85 in.At full height - bucket level(B)
1999 mm
79 in.At full height - bucket dumped (C)
1667 mm
66 in.
Overall length (I+F), ft (m) 3076 mm
121 in.
Digging depth (H) 149 mm
6 in.
Reach At maximum height (D)
756 mm
30 in.At ground level - bucket level (F)
1351 mm
51 in.
Bucket angle Dump angle, degrees (E)
36 degree (angle)Rollback angle, degrees (G)
34 degree (angle)Dump angle, ground
115 degree (angle)
Cycle times Loader raise, seconds
3.19 secondsLoader lower, seconds
1.94 secondsBucket dump, seconds
4.76 secondsBucket rollback, seconds
2.91 seconds

Fenton, MO

200 Erb Industrial Dr.
Fenton, MO 63026

Foristell, MO

21000 Veterans Memorial Pkwy
Foristell, MO 63348

Mt. Vernon, IL

11322 State Rt 148
Mt. Vernon, IL 62864

Cape Girardeau, MO

1421 South West End Blvd.
Cape Girardeau, MO 63703

Paducah, KY

6115 US Highway 45 South
Paducah, KY 42002

Cuba, MO

6885 Old Route 66
Cuba, MO 65453

Owensboro, KY

315 Worthington Rd.
Owensboro, KY 42301

Evansville, IN

9800 Indiana 57
Evansville, IN 47725