755K Crawler Loader John Deere
- Net Power: 190 net hp (141.7 kW) @ 1,800 rpm
- Operating Weight: 45,178 lb. (20 492 kg)
- Heaped Capacity: 3.2 cu. yd. (2.45 m³)
This equipment is available for rent.
755K Crawler Loader John Deere
Engine
Our IT4/EU Stage IIIB engines employ cooled exhaust gas recirculation (EGR) for reducing NOX, and a diesel particulate filter and diesel oxidation catalyst to reduce particulate matter.
Quad-Cool design isolates coolers from engine heat for increased efficiency and durability, and keeps them well protected behind the heavy-duty grille and fan.
Hydraulic-driven variable-speed fan runs only as needed, reducing noise and fuel consumption.
Hydraulics
Separate, sealed hydraulic and hydrostatic systems with common fluid and filter codes eliminate cross contamination.
In-cylinder sensors enable better control and help speed cycles in repetitive applications.
Transmission
Counter-rotating tracks and variable speed control increases productivity.
Controls
Choose joystick, multiple-lever hydraulic controls, or V-pattern transmission lever.
Serviceability
Large service doors open wide, and same-side daily checkpoints are conveniently grouped for ground-level access.
Operator station tilts a full 53 degrees in minutes, for wide-open component access.
Total Machine Control
Total Machine Control (TMC) allows you to customize operating characteristics and response, for superb, one-of-a-kind control. TMC can also be used to monitor machine readings such as mileage and hours.
Undercarriage
Heavy-duty sealed and lubed undercarriage is standard, with SC-2 extended-life optional.
755K Crawler Loader John Deere
DRIVELINE
Engine Manufacturer |
John Deere |
|
|
|
Engine Model |
PowerTech PVX 6068 |
|
|
|
Emission Rating |
Interim Tier 4 |
|
|
|
Displacement, ltr (Inches³) |
6.8 (414) |
|
|
|
Rated Speed, rpm |
1800 |
|
|
|
Engine Output - Net, kW (hp) |
142 (190) |
|
|
|
Transmission type |
Hydrostatic |
|
|
|
Final drive type |
In-line Drive Motor |
|
|
|
Track rollers per side - std |
6 |
|
|
|
Track shoe pitch, mm (inches) |
203 (8) |
|
|
|
Track shoe width, mm (inches) |
560 (22) |
|
|
|
Ground Contact Area, cm²(Inches²) |
28985 (4493) |
|
|
|
Track shoes per side - std |
38 |
|
|
|
DIMENSIONS
Overall length, mm (ft/in) |
6824 (16 ft 5 in) |
|
|
|
Max. height, mm (ft/in) |
3330 (10 ft 11 in) |
|
|
|
Track length on ground, mm (inches) |
2588 (102) |
|
|
|
Ground clearance, mm (inches) |
432 (17) |
|
|
|
Track gauge - standard, mm (ft/in) |
1880 (6 ft 2 in) |
|
|
|
Shovel 1 width, mm (ft/in) |
2591 (8 ft 6 in) |
|
|
|
Shovel 1 dump height 45°max, mm (ft/in) |
2950 (9 ft 8 in) |
|
|
|
Bucket pin height, mm (ft/in) |
4080 (13 ft 5 in) |
|
|
|
Bucket reach - max, mm (ft/in) |
1100 (3 ft 7 in) |
|
|
|
Digging depth, mm (inches) |
167 (6.6) |
|
|
|
Steering clutches and brakes |
Yes - Hydrostatic |
|
|
|
CAPACITIES
Fuel tank capacity, ltr (gallons (US)) |
326 (86) |
|
|
|
Implement hydraulic tank, ltr (gallons (US)) |
121 (32) |
|
|
|
Shovel 1 capacity, m³(yd³) |
2.5 (3.2) |
|
|
|
PERFORMANCE
Ground bearing pressure - standard, kPa (PSI) |
76.5 (11.1) - GP Bucket |
|
|
|
Static tipping load shovel 1, kg (lbs) |
15362 (33867) |
|
|
|
Breakout force - max, kN (lbf) |
197 (44300) |
|
|
|
Voltage, V |
24 |
|
|
|
Alternator output, Amp |
100 |
|
|
|
Pump type |
Piston Pump - Load Sensed |
|
|
|
Pump flow, lt/min (gallons (US) / min) |
246 (65) |
|
|
|
Relief pressure, kPa (PSI) |
26028 (3775) |
|
|
|
WEIGHTS
Operating weight std, kg (lbs) |
20492 (45178) |