655K Crawler Loader John Deere
- Net Power: 145 hp (110 kW) @ 1,800 rpm
- Operating Weight: 40,614 lb.(18 422 kg)
- Heaped Capacity: 2.4 cu. yd. (1.9 m³)
This equipment is available for rent.
655K Crawler Loader John Deere
Engine
Our IT4/EU Stage IIIB engines employ cooled exhaust gas recirculation (EGR) for reducing NOX, and a diesel particulate filter and diesel oxidation catalyst to reduce particulate matter.
Quad-Cool design isolates coolers from engine heat for increased efficiency and durability, and keeps them well protected behind the heavy-duty grille and fan.
Hydraulic-driven variable-speed fan runs only as needed, reducing noise and fuel consumption.
Hydraulics
Separate, sealed hydraulic and hydrostatic systems with common fluid and filter codes eliminate cross contamination.
In-cylinder sensors enable better control and help speed cycles in repetitive applications.
Transmission
Counter-rotating tracks and variable speed control increases productivity.
Controls
Choose joystick, multiple-lever hydraulic controls, or V-pattern transmission lever.
Serviceability
Large service doors open wide, and same-side daily checkpoints are conveniently grouped for ground-level access.
Operator station tilts a full 53 degrees in minutes, for wide-open component access.
Total Machine Control
Total Machine Control (TMC) allows you to customize operating characteristics and response, for superb, one-of-a-kind control. TMC can also be used to monitor machine readings such as mileage and hours.
Undercarriage
Heavy-duty sealed and lubed undercarriage is standard, with SC-2 extended-life optional.
655K Crawler Loader John Deere
DRIVELINE
| Engine Manufacturer |
John Deere |
|
|
|
| Engine Model |
PowerTech PVX 6068 |
|
|
|
| Emission Rating |
Interim Tier 4 |
|
|
|
| Displacement, ltr (Inches³) |
6.8 (41) |
|
|
|
| Rated Speed, rpm |
1800 |
|
|
|
| Engine Output - Net, kW (hp) |
110 (145) |
|
|
|
| Transmission type |
Hydrostatic |
|
|
|
| Final drive type |
In-line Drive Motor |
|
|
|
| Track rollers per side - std |
6 |
|
|
|
| Track shoe pitch, mm (inches) |
190 (7.5) |
|
|
|
| Track shoe width, mm (inches) |
508 (20) |
|
|
|
| Ground Contact Area, cm²(Inches²) |
24622 (3816) |
|
|
|
| Track shoes per side - std |
38 |
|
|
|
DIMENSIONS
| Overall length, mm (ft/in) |
6735 (22 ft 1 in) |
|
|
|
| Max. height, mm (ft/in) |
3120 (10 ft 3 in) |
|
|
|
| Track length on ground, mm (inches) |
2414 (95) |
|
|
|
| Ground clearance, mm (inches) |
395 (15.6) |
|
|
|
| Track gauge - standard, mm (ft/in) |
1740 (5 ft 9 in) |
|
|
|
| Shovel 1 width, mm (ft/in) |
2470 (8 ft 1 in) |
|
|
|
| Shovel 1 dump height 45°max, mm (ft/in) |
2665 (8 ft 9 in) |
|
|
|
| Bucket pin height, mm (ft/in) |
3710 (12 ft 2 in) |
|
|
|
| Bucket reach - max, mm (ft/in) |
1036 (3 ft 5 in) |
|
|
|
| Digging depth, mm (inches) |
152 (6) |
|
|
|
| Steering clutches and brakes |
Yes - Hydrostatic |
|
|
|
CAPACITIES
| Fuel tank capacity, ltr (gallons (US)) |
263 (69.5) |
|
|
|
| Implement hydraulic tank, ltr (gallons (US)) |
121 (32) |
|
|
|
| Shovel 1 capacity, m³(yd³) |
1.9 (2.4) |
|
|
|
PERFORMANCE
| Ground bearing pressure - standard, kPa (PSI) |
73.7 (10.7) - GP Bucket |
|
|
|
| Static tipping load shovel 1, kg (lbs) |
12443 (27432) |
|
|
|
| Breakout force - max, kN (lbf) |
148 (33271) |
|
|
|
| Voltage, V |
24 |
|
|
|
| Alternator output, Amp |
100 |
|
|
|
| Pump type |
Piston Pump - Load Sensed |
|
|
|
| Pump flow, lt/min (gallons (US) / min) |
189 (50) |
|
|
|
| Relief pressure, kPa (PSI) |
26028 (3775) |
|
|
|
WEIGHTS
| Operating weight std, kg (lbs) |
18422 (40614) |