Features & Specs
  • Interim Tier 4 certified engine
  • AirCushion Suspension System
  • 18-speed PowerShift transmission
  • AutoLoad automates hydraulic-lift function
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 460-560
Fuel Tank Capacity 340 gal.
Fuel Consumption 8.9-18 gal/hr
Weight 40,000 lbs
Ballast Weight 54,000 lbs
Width 13 ft 0 in
Length 22 ft 5 in
Height 11 ft 11 in


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Case IH 385
Case IH 435
Case IH 485
Case IH 535
Challenger 835
Challenger 845
Challenger 855
Challenger 865
Challenger 875
Challenger 945
Challenger 955
Challenger 965
Challenger 975


John Deere 9460RT / 9510RT / 9560RT Scraper Tractors

Engine 9460RT 9510RT 9560RT
Manufacture and Model John Deere PowerTech PSX
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
Net Peak Power @ 2,100 rpm 460 hp (338 kW) 510 hp (375 kW) 560 hp (412 kW)
Net Peak Torque @ 1,600 rpm 1,566 lb ft (2123 Nm) 1,736 lb ft (2354 Nm) 1,907 lb ft (2585 Nm)
Displacement 824 cu. in. (13.5 L)
Aspiration Dual-series turbocharger with fixed geometry (1st stage), variable geometry (2nd stage); air-to-air aftercooling and cooled Exhaust Gas Recirculation

Transmission    
Standard (18 forward / 6 reverse) 25 mph (40km/h)

Hydraulic System    
Rated Pump Output
  High-Flow Hydraulics

75 gpm (284 L/min)
Maximum Operating Pressure 2,900 psi (20 000 kPa)

Capacities      
Fuel Tank 350 gal. (1325 L)
Cooling System 14.6 gal. (55 L)
Crankcase Oil Volume 12.7 gal. (48 L)
Hydraulic/Transmission/Axle
     w/o 3-Point Rear Hitch and PTO
     w/ 3-Point Rear Hitch and PTO
92.9 gal. (352 L)
94.9 gal. (359.5 L)

Approximate Shipping Weights    
Weight (less ballast) 40,000 lb. (18 144 kg)
Maximum Ballast Weight 54,000 lb. (24 494 kg)


Dimensions 9460RT 9510RT 9560RT
A) Wheelbase 9 ft. 8 in. (2946 mm)
B) Length
     Drive Wheel to Idler Wheel
     Overall w/ Hitch and Coupler
     Overall w/o Hitch and Coupler

13 ft. 9 in. (4196 mm)
22 ft. 5 in. (6832 mm)
19 ft. 9 in. (6020 mm)
C) Width
      Wtih 30 in. Track
      With Frame Weights

11 ft. 4 in. (3454 mm)
13 ft. 0 in. (3962 mm)
D) Height from Ground
     CommandView Cab
     To Top of Exhaust
     Top Top of Air Stack

11 ft. 2 in. (3393 mm)
11 ft. 11 in. (3634 mm)
11 ft. 6 in. (3501 mm)
E) Crop Clearance, Axle Housing 16 in. (406 mm)
F) Height to Hinge Pin
     Drawbar

19 in. (483 mm)


Erb Equipment Phone Numbers