Features & Specs
  • Interim Tier 4 certified engine
  • Unobstructed all-around visibility
  • 18-speed PowerShift transmission
  • AutoLoad automates hydraulic-lift function
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 460-560
Fuel Tank Capacity 350 gal.
Fuel Consumption 9.7-16 gal/hr
Weight 40,000 lbs
Ballast Weight 54,000 lbs
Width 15 ft 7 in
Length 24 ft 7 in
Height 14 ft 9 in


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Case IH 385
Case IH 435
Case IH 485
Case IH 535
Challenger 835
Challenger 845
Challenger 855
Challenger 865
Challenger 875
Challenger 945
Challenger 955
Challenger 965
Challenger 975


John Deere 9460R / 9510R / 9560R Scraper Tractors

Engine 9460R 9510R 9560R
Manufacture and Model John Deere PowerTech PSX
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
Net Peak Power @ 2,100 rpm 460 hp (338 kW) 510 hp (375 kW) 560 hp (412 kW)
Net Peak Torque @ 1,600 rpm 1,566 lb ft (2123 Nm) 1,736 lb ft (2354 Nm) 1,907 lb ft (2585 Nm)
Displacement 824 cu. in. (13.5 L)
Aspiration Dual-series turbocharger with fixed geometry (1st stage), variable geometry (2nd stage); air-to-air aftercooling and cooled Exhaust Gas Recirculation

Transmission    
Standard (18 forward / 6 reverse) 25 mph (40km/h)

Hydraulic System    
Rated Pump Output
  Base Hydraulics
  High-Flow Hydraulics

48 gpm (182 L/min)
75 gpm (284 L/min)
Maximum Operating Pressure 2,900 psi (20 000 kPa)

Capacities      
Fuel Tank 350 gal. (1325 L)
Cooling System 14.6 gal. (55 L)
Crankcase Oil Volume 12.7 gal. (48 L)
Hydraulic/Transmission/Axle w/o 3-Point Rear Hitch and PTO 47.5 gal. (180 L)

Approximate Shipping Weights    
Weight (less ballast) 40,000 lb. (18 144 kg)
Maximum Ballast Weight 54,000 lb. (24 494 kg)


Dimensions 9460R 9510R 9560R
A) Wheelbase 11 ft. 6 in. (3500 mm)
B) Overall Length
     With Hitch and Coupler
     Without Hitch and Coupler

24 ft. 7 in. (7495 mm)
23 ft. 6 in. (7154 mm)
C) Overall Width (with base tires)
     Left-Hand Fuel Tank to Right-Hand Step
     Axle
          Length
          Diameter (standard)
14 ft. 5 in. (4386 mm)
11 ft 10 in (3624 mm)

10 ft. 0 in. (3048 mm)
4.6875 in. (120 mm)
15 ft. 7 in. (4762 mm)
11 ft 10 in (3624 mm)

10 ft. 0 in. (3048 mm)
4.6875 in. (120 mm)
15 ft. 7 in. (4762 mm)
11 ft 10 in (3624 mm)

10 ft. 0 in. (3048 mm)
4.6875 in. (120 mm)
D) Height from Ground
     CommandView II Cab
     To Top of Exhaust
     To Top of Air Stack

12 ft. 1 in. (3681 mm)
14 ft. 9 in. (4502 mm)
12 ft. 0 in. (3657 mm)
E) To Top of Hood 9 ft. 0 in. (2741 mm)
F) Crop Clearance, Axle Housing 30.8 in. (782 mm)
G) Height to Hinge Pin
     Drawbar Support
     Drawbar
20.5 in. (520 mm)
16 in. (406 mm)
19 in. (482 mm)
Turning Radius (tractor centerline)      
Without Steering Stops 14 ft. 7.2 in. (4.45 m)
With 3-degress Stops 15 ft. 7.2 in. (4.72 m)
With 5-degress Stops 17 ft. 0 in. (5.18 m)
With 10-degress Stops 19 ft. 6 in. (5.92 m)


Erb Equipment Phone Numbers