Features & Specs
  • Interim Tier 4 (IT4)-certified engine
  • Equipped with steering wheel
  • Trouble free serviceability
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 265
Fuel Tank Capacity 110 gal.
Fuel Consumption 2.6-6.8 gal/hr
Moldboard 14 ft
Weight 37,500 lb
Height 10 ft. 5 in.
Length 29 ft. 2 in.


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 160M2 VHP
Volvo G960B
Volvo G970
Komatsu GD755-5R


John Deere 870G/GP Motor Grader

Engine
Manufacture and Model John Deere PowerTech PSX 9.0L
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
Net Power
-- Gear 1
-- Gear 2
-- Gear 3
-- Gear 4
-- Gear 5
-- Gear 6
-- Gear 7
-- Gear 8

185 hp (138 kW)
192 hp (143 kW)
210 hp (157 kW)
223 hp (166 kW)
231 hp (172 kW)
248 hp (185 kW)
261 hp (195 kW)
265 hp (198 kW)
Net Peak Torque 959 lb. ft. (1300 Nm)
Displacement 548 cu. in. (9.0 L)
Aspiration Series turbocharged, charge-air cooled
Lubrication Full-flow spin-on filter and integral cooler
Air Cleaner with Restriction Indicator Dual element, dry
Electrical System 24 volt with 100 amp alternator

Transmission      
Type Direct-drive John Deere PowerShift Plus, modulated shift-on-the-go, Event-Based Shifting (EBS), inching pedal; independent transmission reservoir with separate filtration and cooling system
Travel Speeds    
- Shift Level Position 1
- Shift Level Position 2
- Shift Level Position 3
- Shift Level Position 4
- Shift Level Position 5
- Shift Level Position 6
- Shift Level Position 7
- Shift Level Position 8
2.4 mph (3.9 km/h)
3.5 mph (5.6 km/h)
4.9 mph (7.9 km/h)
6.8 mph (10.9 km/h)
10.4 mph (16.7 km/h)
14.5 mph (23.3 km/h)
20.0 mph (32.2 km/h)
28.0 mph (45.0 km/h)
 
Blade Function      
All-hydraulic , industry-standard level placement of blade-function controls; includes float position; 7 discrete saddle positions
Blade Range
-- Lift Above Ground
-- Blade Side Shift, Right or Left
-- Shoulder Reach Outside Wheels
-- Pitch at Ground Level

17.8 in. (452 mm)
26.9 in. (683 mm)
7 ft. 8 in. (2329 mm)
42 degrees forward / 5 degrees back

Moldboard      
Type High-strength, pre-stressed for higher strength, wear-resistant, high-carbon steel and reversible end bits; blade side-shift wear system includes quick-change replaceable wear inserts and quick-adjust jackscrew system
Length 14 ft. (4.27 m)
Height 27 in. (686 mm)
Thickness 1 in. (25 mm)

Capacities      
Fuel Tank 110 gal. (416.4 L)
Cooling System 15.3 gal. (57.9 L)
Engine Oil with Filter 7.4 gal. (28.0 L)
Transmission Fluid 7.5 gal. (28.4 L)
Differential Housing 10 gal. (37.9 L)
Tandem Housing (each) 19.5 gal. (73.8 L)
Circle Gearbox 1.5 gal. (5.7 L)
Hydraulic Reservoir 16 gal. (60.6 L)

Operating Weights    
Standard Equipment  
-- Front
-- Rear
-- Total
9,990 lb (4531 kg)
27,530 lb (12 487 kg)
37,520 lb (17 019 kg)
Standard Equipment with Front Push Block and Ripper
-- Front
-- Rear
-- Total
12,760 lb (5788 kg)
32,000 lb (14 515 kg)
44,760 lb (20 303 kg)
Maximum Operating Weight 48,620 lb (22 054 kg)


Overall Dimensions  
A) Height to Top of Cab 10 ft. 5 in. (3.18 m)
A') Height to Top of Full-Height Cab 11 ft. 2 in. (3.40 m)
B) Height to Top of Exhaust 10 ft. 3 in. (3.13 m)
C) Height to Top of Blade-Lift Cylinders 10 ft. 0 in. (3.05 m)
D) Tandem Axle Spacing 5 ft. 1 in. (1.54 m)
E) Blade Base 8 ft. 4 in. (2.53 m)
F) Wheelbase 20 ft. 3 in. (6.16 m)
G) Overall Length 29 ft. 2 in. (8.89 m)
H) Overall Length with Scarifier 31 ft. 9 in. (9.69 m)
I) Overall Length with Push Block & Ripper 32 ft. 9 in. (9.99 m)
I') Overall Length with Scarifier & Ripper 34 ft. 9 in. (10.59 m)


Erb Equipment Phone Numbers