Features & Specs
  • Final Tier 4 certified engine
  • Reduced tail swing
  • Independent swing boom
  • Easy to navigate enhanced LCD monitor

Horsepower 56.9
Digging Depth 13 ft. 1 in.
Fuel Tank Capacity 31.7 gal.
Fuel Consumption 1.2-2.4 gal/hr
Weight 18,800 lbs
Width 8 ft 1 in
Transport Length 22 ft 5 in
Height 8 ft 4 in


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 308E CR
Hitachi ZX85USB-3
Volvo ECR88
Komatsu PC88MR-8


John Deere 85G Excavator

Engine
Manufacture and Model Yanmar 4TNV98C-WHBW
Non-Road Emission Standards EPA Final Tier 4/EU Stage IV
Net Rated Power 56.9 hp (42.4 kW) @ 2,000 rpm
Displacement 202 cu. in. (3.3 L)

Powertrain    
Maximum Travel Speed  
Low 1.9 mph (3.1 km/h)
High 3.1 mph (5.0 km/h)

Electrical    
Batteries 2 x 12 volt
Alternator Rating 50 amp
Work Lights 2 halogen: 1 mounted on boom and 1 mounted on frame

Ground Pressure    
18 in. Rubber Crawler Pads 6.0 psi (41.5 kPa)
18 in. Continuous Rubber Belt 6.0 psi (41.5 kPa)
18 in. Triple Semi-Grouser Shoes 6.0 psi (41.3 kPa)
24 in. Triple Semi-Grouser Shoes 4.6 psi (31.7 kPa)

Capacities      
Fuel Tank 31.7 gal. (120 L)
Cooling System 2.6 gal. (9.7 L)
Engine Oil with filter 3.2 gal. (12.3 L)
Hydraulic Tank 15 gal. (56 L)
Hydraulic System 27 gal. (103 L)
Propel Gearbox (each) 1.3 qt. (1.2 L)

Operating Weights  

Full Fuel Tank, 0.41 cu. yd., 30 in., 691 lb. Bucket, 6 ft. 11 in. Arm, 3,104 lb. Counterweight, and 165 lb. Operator

18 in. Rubber Crawler Pads - 7 ft. 3 in. Blade 19,244 lb. (8729 kg)
18 in. Continuous Rubber Belt - 7 ft. 3 in. Blade 19,130 lb. (8677 kg)
18 in. Triple Semi-Grouser Shoes - 7 ft. 3 in. Blade 19,564 lb. (8874 kg)
24 in. Triple Semi-Grouser Shoes - 8 ft. 1 in. Blade 19,564 lb. (8874 kg)



Operating Weights 5 ft. 4 in. Arm 6 ft. 11 in. Arm
Arm Digging Force 7,981 lb. (35.5 kN) 6,902 lb. (30.7 kN)
Bucket Digging Force 10,476 lb. (46.6 kN) 10,476 lb. (46.6 kN)
A) Maximum Reach 23 ft. 8 in. (7.21 m) 25 ft. 3 in. (7.70 m)
A') Maximum Reach @ Ground Level 23 ft. 2 in. (7.05 m) 24 ft. 9 in. (7.55 m)
B) Maximum Digging Depth 13 ft. 1 in. (3.99 m) 14 ft. 10 in. (4.51 m)
B') Maximum Digging Depth at 8 ft. Flat Bottom 11 ft. 11 in. (3.62 m) 13 ft. 9 in. (4.20 m)
C) Maximum Cutting Height 22 ft. 3 in. (6.79 m) 23 ft. 5 in. (7.14 m)
D) Maximum Dumping Height 15 ft. 8 in. (4.77 m) 16 ft. 8 in. (5.08 m)
E) Minimum Swing Radius 9 ft. 0 in. (2.74 m) 9 ft. 6 in. (2.89 m)
F) Maximum Vertical Wall 11 ft. 5 in. (3.47 m) 13 ft. 3 in. (4.05 m)
G) Tail Swing Radius 4 ft. 11 in. (1.49 m) 4 ft. 11 in. (1.49 m)




Machine Dimension 5 ft. 4 in. Arm 6 ft. 11 in. Arm
A) Overall Length 21 ft. 9 in. (6.64 m) 22 ft. 5 in. (6.82 m)
B) Overall Height 8 ft. 4 in. (2.53 m)
C) Undercarriage Width
     18 in. Shoes
      24 in. Shoes

7 ft. 3 in. (2.20 m)
8 ft. 1 in. (2.47 m)
D) Rear-End Length/Swing Radius 4 ft. 11 in. (1.49 m)
E) Distance Between Idler/Sprocket Centerline 7 ft. 6 in. (2.29 m)
F) Undercarriage Length 9 ft. 7 in. (2.92 m)
G) Counterweight Clearance 28 in. (0.72 m)
H) Cab Height 8 ft. 4 in. (2.53 m)
I) Ground Clearance 14 in. (360 mm)
J) Upperstructure Width 7 ft. 7 in. (2.32 m)
K) Gauge Width 6 ft. 2 in. (1.87 m)
L) Blade Lift Height 13 in. (340 mm)
Blade Height 18 in. (460 mm)
Blade Width
    18 in. Shoes
    24 in. Shoes

7 ft. 3 in. (2200 mm)
8 ft. 1 in. (2470 mm)
M) Blade Cut Below Grade 13 in. (320 mm)
N) Blade Lift Angle 26 deg.
O) Track Width
     18 in. Shoes
     24 in. Shoes

18 in. (0.45 m)
24 in. (0.60 m)


Erb Equipment Phone Numbers