Features & Specs
  • Interim Tier 4 (IT4)-certified engine
  • Equipped with steering wheel and lever steer
  • Standard with cross slope
  • Trouble free serviceability
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 265
Fuel Tank Capacity 110 gal.
Fuel Consumption 2.5-5.8 gal/hr
Moldboard 12 ft
Weight 38,500 lb
Height 10 ft. 5 in.
Length 29 ft. 2 in.


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 140M2 AWD
Volvo G946B


John Deere 772G/GP Motor Grader

Engine
Manufacture and Model John Deere PowerTech PSX 9.0L
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
Net Power
-- Gear 1 (6wd on)
-- Gear 2 (6wd on)
-- Gear 3 (6wd on)
-- Gear 4 (6wd on)
-- Gear 5 (6wd on)
-- Gear 6 (6wd on)
-- Gear 7 (6wd on)
-- Gear 8

202 hp (151 kW)
205 hp (153 kW)
220 hp (164 kW)
226 hp (169 kW)
244 hp (182 kW)
255 hp (190 kW)
265 hp (198 kW)
250 hp (186 kW)
Net Peak Torque 973 lb. ft. (1319 Nm)
Displacement 548 cu. in. (9.0 L)
Aspiration Series turbocharged, charge-air cooled
Lubrication Full-flow spin-on filter and integral cooler
Air Cleaner with Restriction Indicator Dual element, dry
Electrical System 24 volt with 100 amp alternator

Transmission      
Type Direct-drive John Deere PowerShift Plus, modulated shift-on-the-go, Event-Based Shifting (EBS), inching pedal; independent transmission reservoir with separate filtration and cooling system
Travel Speeds    
- Shift Level Position 1
- Shift Level Position 2
- Shift Level Position 3
- Shift Level Position 4
- Shift Level Position 5
- Shift Level Position 6
- Shift Level Position 7
- Shift Level Position 8
2.5 mph (4.0 km/h)
3.5 mph (5.6 km/h)
4.8 mph (7.7 km/h)
6.8 mph (10.9 km/h)
10.2 mph (16.4 km/h)
14.4 mph (23.2 km/h)
20.1 mph (32.3 km/h)
28.3 mph (45.5 km/h)
 
Blade Function      
All-hydraulic , industry-standard level placement of blade-function controls; includes float position; 7 discrete saddle positions
Blade Range
-- Lift Above Ground
-- Blade Side Shift, Right or Left
-- Shoulder Reach Outside Wheels
-- Pitch at Ground Level

19.3 in. (490 mm)
26.9 in. (683 mm)
6 ft. 10 in. (2083 mm)
42 degrees forward / 5 degrees back

Moldboard      
Type High-strength, pre-stressed for higher strength, wear-resistant, high-carbon steel and reversible end bits; blade side-shift wear system includes quick-change replaceable wear inserts and quick-adjust jackscrew system
Length 12 ft. (3.66 m)
Height 24 in. (610 mm)
Thickness 0.88 in. (22 mm)

Capacities      
Fuel Tank 110 gal. (416.4 L)
Cooling System 15.3 gal. (57.9 L)
Engine Oil with Filter 7.4 gal. (28.0 L)
Transmission Fluid 7.5 gal. (28.4 L)
Differential Housing 10 gal. (37.9 L)
Tandem Housing (each) 19.5 gal. (73.8 L)
Circle Gearbox 1.5 gal. (5.7 L)
Hydraulic Reservoir 16 gal. (60.6 L)

Operating Weights    
Standard Equipment  
-- Front
-- Rear
-- Total
10,760 lb (4881 kg)
27,560 lb (12 501 kg)
38,320 lb (17 382 kg)
Standard Equipment with Front Push Block and Ripper
-- Front
-- Rear
-- Total
13,540 lb (6142 kg)
31,030 lb (14 075 kg)
44,570 lb (20 217 kg)
Maximum Operating Weight 48,000 lb (21 772 kg)


Overall Dimensions  
A) Height to Top of Cab 10 ft. 5 in. (3.18 m)
A') Height to Top of Full-Height Cab 11 ft. 2 in. (3.40 m)
B) Height to Top of Exhaust 10 ft. 3 in. (3.13 m)
C) Height to Top of Blade-Lift Cylinders 10 ft. 0 in. (3.05 m)
D) Tandem Axle Spacing 5 ft. 1 in. (1.54 m)
E) Blade Base 8 ft. 5 in. (2.57 m)
F) Wheelbase 20 ft. 3 in. (6.16 m)
G) Overall Length 29 ft. 2 in. (8.89 m)
H) Overall Length with Scarifier 31 ft. 9 in. (9.69 m)
I) Overall Length with Push Block & Ripper 32 ft. 9 in. (9.99 m)
I') Overall Length with Scarifier & Ripper 34 ft. 9 in. (10.59 m)


Erb Equipment Phone Numbers