Features & Specs
  • Final Tier 4 certified engine
  • Reduced tail swing
  • Easy to navigate enhanced LCD monitor
  • Highly efficient, heavy-duty cooling system

Horsepower 56.9
Digging Depth 13 ft. 6 in.
Fuel Tank Capacity 35.7 gal.
Fuel Consumption 1.2-2.4 gal/hr
Weight 18,200 lbs
Width 8 ft 1 in
Transport Length 20 ft 11 in
Height 8 ft 10 in


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Hitachi ZX75US-3
Komatsu PC78US-8


John Deere 75G Excavator

Engine
Manufacture and Model Yanmar 4TNV98C
Non-Road Emission Standards EPA Final Tier 4/EU Stage IV
Net Rated Power 56.9 hp (42.4 kW) @ 2,000 rpm
Displacement 202 cu. in. (3.3 L)

Powertrain    
Maximum Travel Speed  
Low 1.9 mph (3.1 km/h)
High 3.1 mph (5.0 km/h)

Electrical    
Batteries 2 x 12 volt
Alternator Rating 50 amp
Work Lights 2 halogen: 1 mounted on operator's station and 1 mounted on boom

Ground Pressure    
18 in. Rubber Crawler Pads 5.6 psi (39 kPa)
18 in. Continuous Rubber Belt 5.6 psi (39 kPa)
18 in. Triple Semi-Grouser Shoes 5.4 psi (38 kPa)
24 in. Triple Semi-Grouser Shoes 3.9 psi (27 kPa)

Capacities      
Fuel Tank 35.7 gal. (135 L)
Cooling System 2.6 gal. (9.7 L)
Engine Oil with filter 3.2 gal. (12.3 L)
Hydraulic Tank 15 gal. (56 L)
Hydraulic System 27 gal. (103 L)
Propel Gearbox (each) 1.3 qt. (1.2 L)

Operating Weights  

Full Fuel Tank, 0.41 cu. yd., 30 in., 691 lb. Bucket, 6 ft. 11 in. Arm, 2,877 lb. Counterweight, 8 ft. 1 in. Blade, and 165 lb. Operator

18 in. Rubber Crawler Pads 17,952 lb. (8143 kg)
18 in. Continuous Rubber Belt 17,377 lb. (7882 kg)
18 in. Triple Semi-Grouser Shoes 18,221 lb. (8265 kg)
24 in. Triple Semi-Grouser Shoes 17,412 lb. (7898 kg)



Operating Weights 5 ft. 4 in. Arm 6 ft. 11 in. Arm
Arm Digging Force 7,981 lb. (35.5 kN) 6,902 lb. (30.7 kN)
Bucket Digging Force 10,476 lb. (46.6 kN) 10,476 lb. (46.6 kN)
A) Maximum Reach 21 ft. 1 in. (6.43 m) 22 ft. 8 in. (6.92 m)
A') Maximum Reach @ Ground Level 20 ft. 6 in. (6.26 m) 22 ft. 2 in. (6.76 m)
B) Maximum Digging Depth 13 ft. 6 in. (4.11 m) 15 ft. 1 in. (4.61 m)
B') Maximum Digging Depth at 8 ft. Flat Bottom 12 ft. 4 in. (3.75 m) 14 ft. 2 in. (4.32 m)
C) Maximum Cutting Height 23 ft. 8 in. (7.21 m) 25 ft. 0 in. (7.61 m)
D) Maximum Dumping Height 16 ft. 10 in. (5.12 m) 18 ft. 1 in. (5.51 m)
E) Minimum Swing Radius 5 ft. 11 in. (1.81 m) 7 ft. 1 in. (2.17 m)
F) Maximum Vertical Wall 12 ft. 0 in. (3.67 m) 13 ft. 10 in. (4.22 m)
G) Tail Swing Radius 4 ft. 3 in. (1.29 m) 4 ft. 3 in. (1.29 m)




Machine Dimension 5 ft. 4 in. Arm 6 ft. 11 in. Arm
A) Overall Length 20 ft. 8 in. (6.30 m) 20 ft. 11 in. (6.37 m)
B) Overall Height 8 ft. 10 in. (2.69 m) 8 ft. 10 in. (2.69 m)
C) Undercarriage Width
     18 in. Shoes
      24 in. Shoes

7 ft. 7 in. (2.32 m)
8 ft. 1 in. (2.47 m)
D) Rear-End Length/Swing Radius 4 ft. 3 in. (1.29 m)
E) Distance Between Idler/Sprocket Centerline 7 ft. 6 in. (2.29 m)
F) Undercarriage Length 9 ft. 7 in. (2.92 m)
G) Counterweight Clearance 29 in. (0.73 m)
H) Cab Height 8 ft. 10 in. (2.69 m)
I) Ground Clearance 14 in. (360 mm)
J) Upperstructure Width 7 ft. 7 in. (2.32 m)
K) Gauge Width 6 ft. 2 in. (1.87 m)
L) Blade Lift Height 14 in. (360 mm)
Blade Height 19 in. (480 mm)
Blade Width
    18 in. Shoes
    24 in. Shoes

7 ft. 9 in. (2320 mm)
8 ft. 1 in. (2470 mm)
M) Blade Cut Below Grade 12 in. (300 mm)
N) Blade Lift Angle 27 deg.
O) Track Width
     18 in. Shoes
     24 in. Shoes

18 in. (0.45 m)
24 in. (0.60 m)


Erb Equipment Phone Numbers