Features & Specs
  • 6.8 L Interim Tier 4 certified engine
  • Hydrostatic drivetrain with Total Machine Control (TMC)
  • Innovative V-cool cooling system
  • Sealed-switch module for fingertip control
  • Hydraulically-driven cooling fan for fuel efficiency and quiet operation
  • Best-in-class access to service and maintenance points for maximum uptime
  • Optional factory Integrated Grade Control (IGC) ready
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 125
Blade Width 120"-132"
Weight 30,750 lbs
Fuel Tank Capacity 75 gal.
Fuel Consumption 1.9-3.6 gal/hr
Blade Capacity 3.4-3.8 cu yd
Height 9 ft 8 in
Length 15 ft. 9 in.


View Current Brochure View Non Current Specs View Used Equipment

Competitive Models
Case 1150K
Cat D6K/LGP
Komatsu D51EX-22
Komatsu D51PX-22


John Deere 700K Crawler Dozer

Engine
Manufacture and Model John Deere PowerTech PVX 6068
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
SAE Net Rated Power 125 hp (93 kW) @ 1,800 rpm
Net Peak Torque 416 lb. ft. (563 Nm) @ 1,300 rpm
Displacement 414 cu. in. (6.8 L)
Air Cleaner Dual-stage dry tube with tangential unloader
Electrical System 24 volt with 100 amp alternator
Cooling Fan Variable-speed suction fan with optional reversing feature

Transmission      
Travel Speeds 5.5 mph (8.9 km/h)

Capacities      
Fuel Tank 75 gal. (284 L)
Cooling System with Recovery Tank 8.8 gal. (33.4 L)
Engine Oil with Filter 6.5 gal. (24.6 L)
Transmission Reservoir with Filter 18.2 gal (68.9 L)
Hydraulic Reservoir and Filter 14.2 gal. (53.8 L)

Undercarriage 700K XLT 700K LGP
Tracks John Deere Dura-Trax, features large deep-heat-treated, sealed, and lubricated track links and through-hardened, sealed, and lubricated rollers for maximum wear resistance; sprockets are segmented
Track Gauge 70 in. (1778 mm) 78 in. (1981 mm)
Grouser Width (closed center, single bar) 22 in. (560 mm) 30 in. (760 mm)
Chain Sealed and Lubricated
Shoes (each side) 39
Track Rollers (single flange, each side) 7
Track Length on Ground 102 in. (2590 mm) 102 in. (2590 mm)
Ground Contact Area 4,487sq. in. (29 946 cm2) 6,118 sq. in. (39 472 cm2)
Ground Pressure 6.74 psi (46.4 kPa) 5.11 psi (35.2 kPa)
Track Pitch 7.5 in. (191 mm) 7.5 in. (191 mm)

Operating Weights 700K XLT 700K LGP
Base Weight (with standard equipment, rollover protective structure, full fuel tank, and 175lb operator) 30,225 lb (13 710 kg) 31,240 lb (14 170 kg)


Overall Dimensions 700K LT 700K LGP
A) Overall Height to Roof 9 ft. 8 in. (2936 mm) 9 ft. 8 in. (2936 mm)
B) Tread Depth with Single-Bar Grouser 2.2 in. (56 mm) 2.2 in. (56 mm)
C) Ground Clearance in Dirt 15.5 in. (393 mm) 15.5 in. (393 mm)
D) Overall Length 15 ft. 9 in. (4815 mm) 15 ft. 9 in. (4815 mm)
E) Length with Retrieval Hitch 15 ft. 4 in. (4680 mm) 15 ft. 4 in. (4680 mm)
E') Length with Drawbar, Extended 16 ft. 6 in. (5033 mm) 16 ft. 6 in. (5033 mm)
F) Blade Lift Height 39 in. (991 mm) 39 in. (991 mm)
G) Blade Digging Depth 21 in. (533 mm) 21 in. (533 mm)
H) Blade Cutting Edge Angle, Adjustable 21 in. (533 mm) 21 in. (533 mm)


Erb Equipment Phone Numbers