Features & Specs
  • Interim Tier 4 (IT4)-certified engine
  • Equipped with steering wheel and lever steer
  • Standard with cross slope
  • Trouble free serviceability
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 235
Fuel Tank Capacity 110 gal.
Fuel Consumption 2.5-5.3 gal/hr
Moldboard 12 ft
Weight 37,500 lb
Height 10 ft. 5 in.
Length 29 ft. 2 in.


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 12M2 AWD


John Deere 672G/GP Motor Grader

Engine
Manufacture and Model John Deere PowerTech PSX 9.0L
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
Net Power
-- Gear 1 (6wd on)
-- Gear 2 (6wd on)
-- Gear 3 (6wd on)
-- Gear 4 (6wd on)
-- Gear 5 (6wd on)
-- Gear 6 (6wd on)
-- Gear 7 (6wd on)
-- Gear 8

178 hp (133 kW)
184 hp (137 kW)
196 hp (146 kW)
208 hp (155 kW)
223 hp (166 kW)
228 hp (170 kW)
235 hp (175 kW)
231 hp (172 kW)
Net Peak Torque 865 lb. ft. (1173 Nm)
Displacement 548 cu. in. (9.0 L)
Aspiration Series turbocharged, charge-air cooled
Lubrication Full-flow spin-on filter and integral cooler
Air Cleaner with Restriction Indicator Dual element, dry
Electrical System 24 volt with 100 amp alternator

Transmission      
Type Direct-drive John Deere PowerShift Plus, modulated shift-on-the-go, Event-Based Shifting (EBS), inching pedal; independent transmission reservoir with separate filtration and cooling system
Travel Speeds    
- Shift Level Position 1
- Shift Level Position 2
- Shift Level Position 3
- Shift Level Position 4
- Shift Level Position 5
- Shift Level Position 6
- Shift Level Position 7
- Shift Level Position 8
2.5 mph (4.0 km/h)
3.5 mph (5.6 km/h)
4.8 mph (7.7 km/h)
6.8 mph (10.9 km/h)
10.2 mph (16.4 km/h)
14.4 mph (23.2 km/h)
20.1 mph (32.3 km/h)
28.3 mph (45.5 km/h)
 
Blade Function      
All-hydraulic , industry-standard level placement of blade-function controls; includes float position; 7 discrete saddle positions
Blade Range
-- Lift Above Ground
-- Blade Side Shift, Right or Left
-- Shoulder Reach Outside Wheels
-- Pitch at Ground Level

19.3 in. (490 mm)
26.9 in. (683 mm)
6 ft. 10 in. (2083 mm)
42 degrees forward / 5 degrees back

Moldboard      
Type High-strength, pre-stressed for higher strength, wear-resistant, high-carbon steel and reversible end bits; blade side-shift wear system includes quick-change replaceable wear inserts and quick-adjust jackscrew system
Length 12 ft. (3.66 m)
Height 24 in. (610 mm)
Thickness 0.88 in. (22 mm)

Capacities      
Fuel Tank 110 gal. (416.4 L)
Cooling System 15.3 gal. (57.9 L)
Engine Oil with Filter 7.4 gal. (28.0 L)
Transmission Fluid 7.5 gal. (28.4 L)
Differential Housing 10 gal. (37.9 L)
Tandem Housing (each) 19.5 gal. (73.8 L)
Circle Gearbox 1.5 gal. (5.7 L)
Hydraulic Reservoir 16 gal. (60.6 L)

Operating Weights    
Standard Equipment  
-- Front
-- Rear
-- Total
10,540 lb (4781 kg)
26,930 lb (12 215 kg)
37,470 lb (16 996 kg)
Standard Equipment with Front Push Block and Ripper
-- Front
-- Rear
-- Total
13,230 lb (6001 kg)
30,810 lb (13 975 kg)
44,040 lb (19 976 kg)
Maximum Operating Weight 46,800 lb (21 228 kg)


Overall Dimensions  
A) Height to Top of Cab 10 ft. 5 in. (3.18 m)
A') Height to Top of Full-Height Cab 11 ft. 2 in. (3.40 m)
B) Height to Top of Exhaust 10 ft. 3 in. (3.13 m)
C) Height to Top of Blade-Lift Cylinders 10 ft. 0 in. (3.05 m)
D) Tandem Axle Spacing 5 ft. 1 in. (1.54 m)
E) Blade Base 8 ft. 5 in. (2.57 m)
F) Wheelbase 20 ft. 3 in. (6.16 m)
G) Overall Length 29 ft. 2 in. (8.89 m)
H) Overall Length with Scarifier 31 ft. 9 in. (9.69 m)
I) Overall Length with Push Block & Ripper 32 ft. 9 in. (9.99 m)
I') Overall Length with Scarifier & Ripper 34 ft. 9 in. (10.59 m)


Erb Equipment Phone Numbers