Features & Specs
  • Interim Tier 4 certified engine
  • Limited slip mechanical front wheel drive
  • Exclusive electrohydraulic controlled loader and backhoe
  • Redesigned easier to clean cooling package
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 106
Digging Depth 16 ft 1 in
w/ Extendahoe 20 ft 0 in
Fuel Tank Capacity 41 gal.
Fuel Consumption 1.2-2.3 gal/hr
Loader Lift Cap. 6,815 lbs
Weight 20,500 lbs
Width 7 ft 2 in
Transport Length 24 ft 6 in
Height 9 ft 3 in


View Current Brochure View Non Current Specs View Used Equipment




John Deere 410K TC Backhoe Loader

Engine
Manufacture and Model John Deere PowerTech Plus 4045HT063 turbocharged
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
Net Peak Power 106 hp (79 kW) @ 2,000 rpm
Net Peak Torque 316 lb. ft. (429 Nm) @ 1,300 rpm
Displacement 276 cu. in. (4.5 L)
Air Cleaner Dual-stage dry tube with safety element, evacuator valve
Electrical System 12 volt with 200 amp alternator
Cooling Fan Electronically controlled, variable-rate suction type

Hydraulics      
Main Pump Pressure compensated load sensing, axial piston pump
Pump Flow @ 2,200 rpm
--Backhoe
--Loader

42 gpm (159 L/m)
42 gpm (159 L/m)
System Relief Pressure
--Backhoe
--Loader

3,625 psi (24 993 kPa)
3,625 psi (24 993 kPa)

Capacities      
Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element 6-micron filtration; 1,000 break-in/service hours
Cooling System 34.8 qt. (32.9 L)
Rear Axle 19 qt. (18 L)
Engine Oil (including vertical spin-on filter) 13.7 qt. (13 L)
Torque Converter and Transmission 16 qt. (15.1 L)
Fuel Tank 41 gal. (155.2 L)
Hydraulic System 24.6 gal. (93.1 L)
Hydraulic Reservoir 9.8 gal. (37.1 L)
MFWD Housing
--Axle
--Planetary (each)
6.9 qt. (6.5 L)
1 qt. (0.9 L)

Operating Weights  
Base Weight (with standard equipment, rollover protective structure, full fuel tank, and 175lb operator) 20,494 lb (9296 kg)


Overall Dimensions  
A) Ground Clearance, minimum 14 in. (356 mm)
B) Overall Length, transport 24 ft. 6 in. (7.46 m)
C) Width Over Tires 7 ft. 2 in. (2.18 m)
D) Height to Top of ROPS/Cab 9 ft. 3 in. (2.82 m)
E) Length from Axle to Axle 7 ft. 0 in. (2.14 m)

Backhoe Dimensions / Performance  
Digging Force
-- Bucket Cylinder
-- Crowd Cylinder

15,430 lb. (68.6 kN)
8,741 lb. (38.9 kN)
  w/ Extendable Dipperstick
  Retracted Extended
F) Loading Height, Truck Loading Position 12 ft. 8 in. (3.86 m) 15 ft. 6 in. (4.72 m)
G) Reach from Center of Swing Pivot 19 ft. 11 in. (6.07 m) 23 ft. 8 in. (7.21 m)
H) Reach from Center of Rear Axle 23 ft. 7 in. (7.19 m) 27 ft. 4 in. (8.33 m)
I) Digging Depth (SAE maximum) 16 ft. 1 in. (4.90 m) 20 ft. 0 in. (6.10 m)
J) Digging Depth (SAE)
   2-ft (610 mm) Flat Bottom
   8-ft (2440 mm) Flat Bottom

15 ft. 11 in. (4.85 m)
14 ft. 11 in. (4.55 m)

19 ft. 11 in. (6.07 m)
19 ft. 1 in. (5.82 m)
K) Stabilizer Width, Transport 7 ft. 7 in. (2.30 m) 7 ft. 7 in. (2.30 m)
L) Stabilizer Spread, Operating 11 ft. 4 in. (3.45 m) 11 ft. 4 in. (3.45 m)
M) Stabilizer Overall Width, Operating 13 ft. 3 in. (4.03 m) 13 ft. 3 in. (4.03 m)
N) Bucket Rotation 190 deg. 190 deg.
O) Transport Height 12 ft. 10 in. (3.91 m) 12 ft. 10 in. (3.91 m)

Erb Equipment Phone Numbers