Features & Specs
  • 13.5L Interim Tier 4 (IT4)-certified engine
  • Exclusive downhill-descent control
  • Swing-out fans and coolers
  • Adaptive suspension control system
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 443
Fuel Tank Capacity 161 gal.
Fuel Consumption 4.4-8.5 gal/hr
Struck Capacity 23.3 cu. yd.
Heaped Capacity 29.7 cu. yd.
Weight 70,500 lb
Width 12 ft. 5 in.
Length 35 ft. 6 in.
Height 12 ft. 8 in.


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 740
Volvo A40E
Terex TA40
Komatsu HM400-2


John Deere 410E Articulated Dump Truck

Engine
Manufacture and Model John Deere PowerTech 6135
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
SAE Net Rated Power 443 hp (330 kW) @ 1,900 rpm
Net Peak Torque 1,685 lb. ft. (2284 Nm) @ 1,200 rpm
Displacement 824 cu. in. (13.5 L)
Aspiration Twin turbocharged and charge air cooled
Electrical System 24 volt with 100 amp alternator

Transmission      
Configuration 8-speed forward, 4-speed reverse countershaft/planetary type with integral retarder and torque-proportioning differential
Controls Push-button FNR, selectable speed- and gear-range limits, selectable retarder aggressiveness, downhill-descent control, and gear-hold
Speeds Forward Reverse
- Gear 1
- Gear 2
- Gear 3
- Gear 4
- Gear 5
- Gear 6
- Gear 7
- Gear 8
3 mph (5 km/h)
5 mph (8 km/h)
7 mph (11 km/h)
11 mph (17 km/h)
15 mph (24 km/h)
21 mph (34 km/h)
30 mph (48 km/h)
34 mph (55 km/h)
4 mph (6 km/h)
5 mph (8 km/h)
7 mph (12 km/h)
11 mph (17 km/h)
-
-
-
-
 
Body      
Capacity
-- Struck
-- Heaped (SAE 2:1)
-- with Optional Tailgate

23.3 cu. yd. (17.8 m3)
29.7 cu. yd. (22.7 m3)
30.9 cu. yd. (23.7 m3)
Maximum Dump Angle 70 degrees

Capacities      
Fuel Tank 161 gal. (609 L)
Engine Oil with Filter 11.4 gal. (43 L)
Engine Coolant 24.6 gal. (93 L)
Transmission Fluid 15.9 gal. (60 L)
Hydraulic Reservoir 64 gal. (242 L)
Axle Fluid with Filter
-- Front
-- Mid
-- Rear
16.4 gal. (62 L)
16.4 gal. (62 L)
18.0 gal. (68 L)

Operating Weights Empty Loaded
Front 36,921 lb (16 747 kg) 47,371 lb (21 487 kg)
Middle 16,819 lb (7629 kg) 52,673 lb (23 892 kg)
Rear 16,484 lb (7477 kg) 52,338 lb (23 740 kg)
Total 70,224 lb (31 853 kg) 152,382 lb (69 119 kg)
Rated Payload 82,157 lb (37 266 kg)


Operating Dimensions  
Turning Circle Radius
-- Inside
-- Outside

15 ft. 2 in. (4.62 m)
29 ft. 2 in. (8.90 m)

Overall Dimensions  
A) Width with Mirrors in Operating Position 12 ft. 5 in. (3.8 m)
B) Length 35 ft. 6 in. (10.81 m)
C) Height 12 ft. 8 in. (3.86 m)
D) Tire-Track Width 8 ft. 9 in. (2.66 m)
E) Width over Tires 11 ft. 2 in. (3.40 m)
F) Width over Fenders 11 ft. 3 in. (3.44 m)
G) Ground Clearance 23 in. (0.58 m)
H) Dump Body Height (Dump position) 22 ft. 8 in. (6.92 m)
I) Dump Body Side Rail Height 10 ft. 10 in. (3.30 m)
J) Dump Body Dump Lip Height, Transport Position 11 ft. 11 in. (3.62 m)
K) Dump Body Ground Clearance, Dump Position 33 in. (0.843 m)
L) Dump Body Length 19 ft. 7 in. (5.97 m)
M) Rear Axle Centerline to Rear of Dump Body 4 ft. 10 in. (1.48 m)
N) Mid Axle to Rear Axle Centerline 6 ft. 5 in. (1.96 m)
O) Front Axle to Mid Axle Centerline 15 ft. 2 in. (4.63 m)
P) Front Axle Clearance to Front of Machine 9 ft. 0 in. (2.74 m)
Q) Approach Angle 26 degrees
R) Maximum Dump Angle 70 degrees


Erb Equipment Phone Numbers