Features & Specs
  • Interim Tier 4 certified engine
  • Powerwise III management system
  • Cool-on-demand hydraulically driven, suction type fan
  • Rigid, reinforced D-channel mainframe
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.

Horsepower 271
Max Digging Depth 26 ft. 10 in.
Fuel Tank Capacity 166 gal.
Fuel Consumption 5.2-9.1 gal/hr
Weight 76,600 lbs
Width 11 ft 2 in
Overall Length 37 ft 1 in
Height 11 ft 10 in


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 336EL
Hitachi ZX350LC-5
Volvo EC340DL
Komatsu PC360LC-10


John Deere 350G LC Excavator

Engine
Manufacture and Model John Deere PowerTech PSX 9.0 L
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IV
Net Rated Power 271 hp (202 kW) @ 1,900 rpm
Displacement 549 cu. in. (9.0 L)
Aspiration Turbocharged, air-to-air charge-air cooler

Powertrain    
Maximum Travel Speed  
Low 2.0 mph (3.2 km/h)
High 3.1 mph (5.0 km/h)

Electrical    
Batteries 2 x 12 volt
Alternator Rating 100 amp
Work Lights 2 halogen: 1 mounted on boom, and 1 mounted on frame

Ground Pressure    
32 in. Triple Semi-Grouser Shoes 7.66 psi (52.8 kPa)

Capacities      
Fuel Tank 166 gal. (628 L)
Cooling System 10.5 gal. (39.7 L)
Engine Oil with filter 7.2 gal. (27 L)
Hydraulic Tank 51 gal. (193 L)
Hydraulic System 77 gal. (290 L)
Swing Drive 12.5 qt. (11.8 L)
Gearbox
   Propel (each)
   Pump Drive
9.0 qt. (8.5 L)
1.2 qt. (1.1 L)

Operating Weights  
Full Fuel Tank, 2.3 cu. yd., 54 in., 2,557 lb. Bucket, 13 ft. 1 in. Arm, 15,274 lb. Counterweight, 32 in. triple semi-grouser shoes, and 175 lb. Operator 76,557 lb. (34 726 kg)


Operating Weights 10 ft. 6 in. Arm 13 ft. 1 in. Arm
Arm Digging Force SAE 39,930 lb. (177.6 kN) 34,314 lb. (152.6 kN)
Bucket Digging Force 50,628 lb. (225.2 kN) 50,628 lb. (225.2 kN)
Lifting Capacity Over Front at Ground Level 20 ft. Reach 28,219 lb. (12 800 kg) 28,331 lb. (12 851 kg)
A) Maximum Reach 36 ft. 5 in. (11.10 m) 38 ft. 11 in. (11.86 m)
A') Maximum Reach @ Ground Level 35 ft. 9 in. (10.89 m) 38 ft. 3 in. (11.67 m)
B) Maximum Digging Depth 24 ft. 3 in. (7.38 m) 26 ft. 10 in. (8.18 m)
B') Maximum Digging Depth at 8 ft. Flat Bottom 23 ft. 8 in. (7.21 m) 26 ft. 5 in. (8.04 m)
C) Maximum Cutting Height 34 ft. 0 in. (10.36 m) 35 ft. 3 in. (10.75 m)
D) Maximum Dumping Height 23 ft. 9 in. (7.24 m) 25 ft. 0 in. (7.63 m)
E) Minimum Swing Radius 14 ft. 8 in. (4.46 m) 14 ft. 8 in. (4.47 m)
F) Maximum Vertical Wall 21 ft. 1 in. (6.42 m) 23 ft. 10 in. (7.27 m)
G) Tail Swing Radius 11 ft. 10 in. (3.60 m) 11 ft. 10 in. (3.60 m)




Machine Dimension 10 ft. 6 in. Arm 13 ft. 1 in. Arm
A) Overall Length 36 ft. 9 in. (11.20 m) 37 ft. 1 in. (11.29 m)
B) Overall Height 10 ft. 9 in. (3.27 m) 11 ft. 10 in. (3.60 m)
C) Rear-End Length/Swing Radius 11 ft. 10 in. (3.60 m)
D) Distance Between Idler/Sprocket Centerline 13 ft. 3 in. (4.05 m)
E) Undercarriage Length 16 ft. 2 in. (4.94 m)
F) Counterweight Clearance 3 ft. 10 in. (1.18 m)
G) Upperstructure Width 9 ft. 10 in. (2.99 m)
H) Cab Height 10 ft. 4 in. (3.14 m)
I) Track Width with Double Bar-Grouser Shoes 24 in. / 28 in. / 32 in.
J) Gauge Width 8 ft. 6 in. (2.59 m)
K) Ground Clearance 20 in. (0.50 m)
L) Width with Shoes
     24 in.
     28 in.
     32 in.

10 ft. 6 in. (3.19 m)
10 ft. 10 in. (3.29 m)
11 ft. 2 in. (3.39 m)


Erb Equipment Phone Numbers