Features & Specs
  • Interim Tier 4 certified engine
  • Ideal for work in tight quarters
  • Limited slip mechanical front wheel drive
  • Exclusive electrohydraulic controlled loader and backhoe
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 102
Digging Depth 14 ft 11 in
w/ Extendahoe 18 ft 5 in
Fuel Tank Capacity 41 gal.
Fuel Consumption 1.2-2.4 gal/hr
Loader Lift Cap. 7,215 lbs
Weight 19,900 lbs
Width 7 ft 2 in
Transport Length 23 ft 10 in
Height 9 ft 2 in


View Current Brochure View Non Current Specs View Used Equipment




John Deere 310SK TC Backhoe Loader

Engine
Manufacture and Model John Deere PowerTech Plus 4045HT063 turbocharged
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
Net Peak Power 102 hp (76 kW) @ 2,000 rpm
Net Peak Torque 301 lb. ft. (408 Nm) @ 1,400 rpm
Displacement 276 cu. in. (4.5 L)
Air Cleaner Dual-stage dry tube with safety element, evacuator valve
Electrical System 12 volt with 200 amp alternator
Cooling Fan Electronically controlled, variable-rate suction type

Hydraulics      
Main Pump Pressure compensated load sensing, axial piston pump
Pump Flow @ 2,200 rpm
--Backhoe
--Loader

42 gpm (159 L/m)
42 gpm (159 L/m)
System Relief Pressure
--Backhoe
--Loader

3,625 psi (24 993 kPa)
3,625 psi (24 993 kPa)

Capacities      
Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element 6-micron filtration; 1,000 break-in/service hours
Cooling System 34.8 qt. (32.9 L)
Rear Axle 19 qt. (18 L)
Engine Oil (including vertical spin-on filter) 13.7 qt. (13 L)
Torque Converter and Transmission 16 qt. (15.1 L)
Fuel Tank 41 gal. (155.2 L)
Hydraulic System 23.6 gal. (89.3 L)
Hydraulic Reservoir 9.8 gal. (37.1 L)
MFWD Housing
--Axle
--Planetary (each)
6.9 qt. (6.5 L)
1 qt. (0.9 L)

Operating Weights  
Base Weight (with standard equipment, rollover protective structure, full fuel tank, and 175lb operator) 19,855 lb (9006 kg)


Overall Dimensions  
A) Ground Clearance, minimum 13 in. (330 mm)
B) Overall Length, transport 23 ft. 10 in. (7.27 m)
C) Width Over Tires 7 ft. 2 in. (2.18 m)
D) Height to Top of ROPS/Cab 9 ft. 2 in. (2.79 m)
E) Length from Axle to Axle 7 ft. 0 in. (2.14 m)

Backhoe Dimensions / Performance  
Digging Force
-- Bucket Cylinder
-- Crowd Cylinder

15,430 lb. (68.6 kN)
8,090 lb. (36.0 kN)
  w/ Extendable Dipperstick
  Retracted Extended
F) Loading Height, Truck Loading Position 11 ft. 3 in. (3.43 m) 14 ft. 1 in. (4.29 m)
G) Reach from Center of Swing Pivot 18 ft. 7 in. (5.66 m) 21 ft. 11 in. (6.68 m)
H) Reach from Center of Rear Axle 22 ft. 1 in. (6.73 m) 25 ft. 4 in. (7.72 m)
I) Digging Depth (SAE maximum) 14 ft. 11 in. (4.55 m) 18 ft. 5 in. (5.61 m)
J) Digging Depth (SAE)
   2-ft (610 mm) Flat Bottom
   8-ft (2440 mm) Flat Bottom

14 ft. 9 in. (4.50 m)
13 ft. 9 in. (4.19 m)

18 ft. 3 in. (5.56 m)
17 ft. 6 in. (5.33 m)
K) Stabilizer Width, Transport 7 ft. 2 in. (2.18 m) 7 ft. 2 in. (2.18 m)
L) Stabilizer Spread, Operating 10 ft. 2 in. (3.10 m) 10 ft. 2 in. (3.10 m)
M) Stabilizer Overall Width, Operating 11 ft. 7 in. (3.53 m) 11 ft. 7 in. (3.53 m)
N) Bucket Rotation 190 deg. 190 deg.
O) Transport Height 11 ft. 5 in. (3.48 m) 11 ft. 5 in. (3.48 m)

Erb Equipment Phone Numbers