Features & Specs
  • 9.0L Interim Tier 4 (IT4)-certified engine
  • Onboard payload weighing system
  • Planetary Powershift transmission
  • High-pressure common-rail fuel injection
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.
Horsepower 285
Fuel Tank Capacity 90 gal.
Fuel Consumption 2.9-5.0 gal/hr
Struck Capacity 16.5 cu. yd.
Heaped Capacity 21.6 cu. yd.
Weight 40,200 lb
Width 9 ft. 8 in.
Length 31 ft. 5 in.
Height 11 ft. 3 in.


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 730
Volvo A30E
Terex TA30
Komatsu HM300-2


John Deere 300D-II Articulated Dump Truck

Engine
Manufacture and Model John Deere PowerTech Plus 6090
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB
SAE Net Rated Power 285 hp (212 kW) @ 2,200 rpm
Net Peak Torque 789 lb. ft. (1070 Nm) @ 1,400 rpm
Displacement 549 cu. in. (9.0 L)
Aspiration Turbocharged and charge air cooled
Electrical System 24 volt with 100 amp alternator

Transmission      
Configuration ZF 6HP592C Ecomat 2+ fully automatic engine-mounted planetary, with lockup torque converter, integral input retarder, and adaptive shift control
Controls Push-button FNR and gear select, gear-hold button and selectable retarder aggressiveness
Speeds
- Gear 1
- Gear 2
- Gear 3
- Gear 4
- Gear 5
- Gear 6
- Reverse

4 mph (7 km/h)
7 mph (11 km/h)
12 mph (19 km/h)
17 mph (27 km/h)
24 mph (38 km/h)
31 mph (50 km/h)
5 mph (8 km/h)
 
Body      
Capacity
-- Struck
-- Heaped (SAE 2:1)
-- with Optional Tailgate
-- Heaped (SAE 1:1)

16.5 cu. yd. (12.6 m3)
21.7 cu. yd. (16.6 m3)
23.2 cu. yd. (17.7 m3)
26.6 cu. yd. (20.3 m3)
Maximum Dump Angle 70 degrees

Capacities      
Fuel Tank 90 gal. (340 L)
Engine Oil with Filter 6.7 gal. (25.5 L)
Engine Coolant 8.7 gal. (32.9 L)
Transmission Fluid 5.8 gal. (21.8 L)
Transfer Case Oil 5.0 qt. (4.7 L)
Hydraulic Reservoir 20.8 gal. (79.0 L)
Axle Oil 5.8 gal. (22.0 L)
Final Drive 4.2 qt. (4.0 L)

Operating Weights Empty Loaded
Front 22,950 lb (10 432 kg) 30,980 lb (14 082 kg)
Middle 10,030 lb (4559 kg) 36,270 lb (16 486 kg)
Rear 10,010 lb (4550 kg) 31,090 lb (16 332 kg)
Total 42,990 lb (19 541 kg) 103,180 lb (46 900 kg)
Rated Payload 60,190 lb (27 326 kg)


Operating Dimensions  
Turning Circle Radius
-- Inside
-- Outside

13 ft. 6 in. (4.11 m)
26 ft. 2 in. (7.98 m)

Overall Dimensions  
A) Width with Mirrors in Operating Position 11 ft. 0 in. (3.35 m)
B) Length 31 ft. 5 in. (9.58 m)
C) Height 11 ft. 9 in. (3.58 m)
D) Tread Width 7 ft. 9 in. (2.36 m)
E) Width over Tires 9 ft. 8 in. (2.95 m)
F) Dump Body Height, Dump Position 20 ft. 4 in. (6.20 m)
G) Dump Body Side Rail, Height 9 ft. 0 in. (2.74 m)
H) Dump Body Dump Lip Height (transport position) 6 ft. 7 in. (2.01 m)
I) Dump Body Ground Clearance, Dump Position 20 in. (510 mm)
J) Dump Body Length 17 ft. 1 in. (5.21 m)
K) Rear Axle Clearance to Rear of Dump Body 4 ft. 7 in. (1.40 m)
L) Mid Axle to Rear Axle Centerline 5 ft. 6 in. (1.68 m)
M) Front Axle to Mid Axle Centerline 13 ft. 8 in. (4.17 m)
N) Ground Clearance 17 in. (0.43 m)
O) Front Axle Clearance to Front of Machine 7 ft. 8 in. (2.34 m)
P) Approach Angle 30 degrees
Q) Maximum Dump Angle 70 degrees


Erb Equipment Phone Numbers