Features & Specs
  • Interim Tier 4 certified engine
  • Powerwise III management system
  • Cool-on-demand hydraulically driven, suction-type fan
  • Rigid, reinforced D-channel mainframe
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.

Horsepower 188
Max Digging Depth 25 ft. 10 in.
Fuel Tank Capacity 132 gal.
Fuel Consumption 3.8-6.5 gal/hr
Weight 66,500 lbs
Width 11 ft 3 in
Transport Length 34 ft 9 in
Height 10 ft 10 in


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 329EL
Hitachi ZX290LC-5
Volvo EC300DL
Komatsu PC290LC-10


John Deere 290G LC Excavator

Engine
Manufacture and Model John Deere PowerTech PVX 6.8 L
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IV
Net Rated Power 188 hp (140 kW) @ 2,100 rpm
Displacement 415 cu. in. (6.8 L)
Aspiration Turbocharged, air-to-air charge-air cooler

Powertrain    
Maximum Travel Speed  
Low 2.1 mph (3.3 km/h)
High 3.4 mph (5.5 km/h)

Electrical    
Batteries 2 x 12 volt
Alternator Rating 100 amp
Work Lights 2 halogen: 1 mounted on boom and 1 mounted on frame

Ground Pressure    
32 in. Triple Semi-Grouser Shoes 6.04 psi (41.6 kPa)

Capacities      
Fuel Tank 132 gal. (500 L)
Cooling System 7 gal. (26.5 L)
Engine Oil with filter 6.5 gal. (24.6 L)
Hydraulic Tank 39 gal. (147.6 L)
Hydraulic System 63 gal. (240 L)
Swing Drive 9 qt. (8.5 L)
Gearbox
   Propel (each)
   Pump Drive

8 qt. (7.6 L)
1.2 qt. (1.1 L)

Operating Weights  
Full Fuel Tank, 1.75 cu. yd., 42 in., 2,280 lb. Bucket, 12 ft. 4 in. Arm, 12,813 lb. Counterweight, 32 in. triple semi-grouser shoes, and 175 lb. Operator 66,338 lb. (30 090 kg)



Operating Weights 10 ft. 2 in. Arm 12 ft. 4 in. Arm
Arm Digging Force SAE 30,992 lb. (137.9 kN) 27,277 lb. (121.3 kN)
Bucket Digging Force 39,352 lb. (175.0 kN) 39,352 lb. (175.0 kN)
Lifting Capacity Over Front at Ground Level 20 ft. Reach 22,461 lb. (10 188 kg) 21,554 lb. (9777 kg)
A) Maximum Reach 35 ft. 2 in. (10.71 m) 37 ft. 0 in. (11.27 m)
A') Maximum Reach @ Ground Level 34 ft. 6 in. (10.52 m) 36 ft. 5 in. (11.10 m)
B) Maximum Digging Depth 23 ft. 9 in. (7.23 m) 25 ft. 10 in. (7.88 m)
B') Maximum Digging Depth at 8 ft. Flat Bottom 23 ft. 2 in. (7.05 m) 25 ft. 4 in. (7.72 m)
C) Maximum Cutting Height 33 ft. 8 in. (10.26 m) 34 ft. 4 in. (10.46 m)
D) Maximum Dumping Height 24 ft. 0 in. (7.31 m) 24 ft. 8 in. (7.52 m)
E) Minimum Swing Radius 12 ft. 10 in. (3.91 m) 12 ft. 10 in. (3.90 m)
F) Maximum Vertical Wall 21 ft. 3 in. (6.48 m) 23 ft. 2 in. (7.05 m)
G) Tail Swing Radius 10 ft. 4 in. (3.14 m) 10 ft. 4 in. (3.14 m)




Machine Dimension 10 ft. 2 in. Arm 12 ft. 4 in. Arm
A) Overall Length 34 ft. 7 in. (10.54 m) 34 ft. 9 in. (10.59 m)
B) Overall Height 10 ft. 5 in. (3.17 m) 10 ft. 10 in. (3.31 m)
C) Rear-End Length/Swing Radius 10 ft. 4 in. (3.14 m)
D) Distance Between Idler/Sprocket Centerline 13 ft. 3 in. (4.05 m)
E) Undercarriage Length 16 ft. 2 in. (4.94 m)
F) Counterweight Clearance 3 ft. 10 in. (1.18 m)
G) Upperstructure Width 9 ft. 6 in. (2.89 m)
H) Cab Height 10 ft. 2 in. (3.11 m)
I) Track Width with Triple Semi-Grouser Shoes 32 in.
J) Gauge Width 8 ft. 6 in. (2.59 m)
K) Ground Clearance 20 in. (0.51 m)
L) Width with Triple Semi-Grouser Shoes
     32 in.

11 ft. 3 in. (3.39 m)


Erb Equipment Phone Numbers