Features & Specs
  • Interim Tier 4 certified engine
  • Powerwise III management system
  • Cool-on-demand hydraulically driven, suction-type fan
  • Rigid, reinforced D-channel mainframe
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.

Horsepower 188
Max Digging Depth 25 ft. 0 in.
Fuel Tank Capacity 132 gal.
Fuel Consumption 3.4-5.9 gal/hr
Weight 55,700 lbs
Width 11 ft 3 in
Transport Length 34 ft 2 in
Height 10 ft 4 in


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 324EL
Hitachi ZX250LC-5
Volvo EC250DL
Komatsu PC240LC-10


John Deere 250G LC Excavator

Engine
Manufacture and Model John Deere PowerTech PVX 6.8 L
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IV
Net Rated Power 188 hp (140 kW) @ 2,100 rpm
Displacement 415 cu. in. (6.8 L)
Aspiration Turbocharged, air-to-air charge-air cooler

Powertrain    
Maximum Travel Speed  
Low 2.1 mph (3.3 km/h)
High 3.4 mph (5.5 km/h)

Electrical    
Batteries 2 x 12 volt
Alternator Rating 100 amp
Work Lights 2 halogen: 1 mounted on boom and 1 mounted on frame

Ground Pressure    
28 in. Triple Semi-Grouser Shoes 6.06 psi (41.8 kPa)
32 in. Triple Semi-Grouser Shoes 5.37 psi (37.0 kPa)

Capacities      
Fuel Tank 132 gal. (500 L)
Cooling System 6 gal. (23 L)
Engine Oil with filter 5.2 gal. (19.5 L)
Hydraulic Tank 39 gal. (147.6 L)
Hydraulic System 63 gal. (240 L)
Gearbox
   Propel (each)
   Pump Drive

6.5 qt. (6.2 L)
1.2 qt. (1.1 L)

Operating Weights  
Full Fuel Tank, 1.38 cu. yd., 42 in., 2,197 lb. Bucket, 11 ft. 10 in. Arm, 11,270 lb. Counterweight, 32 in. triple semi-grouser shoes, and 175 lb. Operator 55,736 lb. (25 281 kg)



Operating Weights 9 ft. 9 in. Arm 11 ft. 10 in. Arm
Arm Digging Force SAE 29,021 lb. (129.1 kN) 25,220 lb. (112.2 kN)
Bucket Digging Force 39,552 lb. (175.9 kN) 39,552 lb. (175.9 kN)
Lifting Capacity Over Front at Ground Level 20 ft. Reach 18,639 lb. (8455 kg) 18,478 lb. (8381 kg)
A) Maximum Reach 33 ft. 9 in. (10.29 m) 35 ft. 10 in. (10.91 m)
A') Maximum Reach @ Ground Level 33 ft. 2 in. (10.11 m) 35 ft. 3 in. (10.75 m)
B) Maximum Digging Depth 22 ft. 10 in. (6.96 m) 25 ft. 0 in. (7.61 m)
B') Maximum Digging Depth at 8 ft. Flat Bottom 22 ft. 2 in. (6.75 m) 24 ft. 5 in. (7.44 m)
C) Maximum Cutting Height 33 ft. 4 in. (10.16 m) 34 ft. 8 in. (10.56 m)
D) Maximum Dumping Height 23 ft. 7 in. (7.20 m) 24 ft. 10 in. (7.58 m)
E) Minimum Swing Radius 11 ft. 3 in. (3.44 m) 11 ft. 3 in. (3.43 m)
F) Maximum Vertical Wall 19 ft. 9 in. (6.03 m) 22 ft. 1 in. (6.74 m)
G) Tail Swing Radius 10 ft. 4 in. (3.14 m) 10 ft. 4 in. (3.14 m)




Machine Dimension 9 ft. 9 in. Arm 11 ft. 10 in. Arm
A) Overall Length 34 ft. 0 in. (10.35 m) 34 ft. 2 in. (10.41 m)
B) Overall Height 10 ft. 1 in. (3.07 m) 10 ft. 4 in. (3.14 m)
C) Rear-End Length/Swing Radius 10 ft. 4 in. (3.14 m)
D) Distance Between Idler/Sprocket Centerline 12 ft. 7 in. (3.84 m)
E) Undercarriage Length 15 ft. 3 in. (4.64 m)
F) Counterweight Clearance 3 ft. 7 in. (1.09 m)
G) Upperstructure Width 9 ft. 6 in. (2.89 m)
H) Cab Height 9 ft. 11 in. (3.01 m)
I) Track Width with Triple Semi-Grouser Shoes 28 in. / 32 in.
J) Gauge Width 8 ft. 6 in. (2.59 m)
K) Ground Clearance 18 in. (0.46 m)
L) Width with Triple Semi-Grouser Shoes
     28 in.
     32 in.

10 ft. 10 in. (3.29 m)
11 ft. 3 in. (3.39 m)


Erb Equipment Phone Numbers