Features & Specs
  • Interim Tier 4 certified engine
  • Three bulkheads in boom
  • Reduced tail swing design
  • High efficient cooling system
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.

Horsepower 159
Max Digging Depth 21 ft. 9 in.
Fuel Tank Capacity 100 gal.
Fuel Consumption 2.5-5.0 gal/hr
Weight 56,200 lbs
Width 10 ft 6 in
Overall Length 30 ft 5 in
Height 10 ft 7 in


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 321D LCR
Hitachi ZX245USLC-5
Volvo ERC235DL
Komatsu PC228USLC-3


John Deere 245G LC Excavator

Engine
Manufacture and Model Isuzu 4HK1
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IV
Net Rated Power 159 hp (119 kW) @ 1,900 rpm
Displacement 317 cu. in. (5.2 L)
Aspiration Turbocharged, air-to-air charge-air cooler

Powertrain    
Maximum Travel Speed  
Low 2.2 mph (3.5 km/h)
High 3.4 mph (5.5 km/h)

Electrical    
Batteries 2 x 12 volt
Alternator Rating 50 amp
5 2 halogen: 1 mounted on boom, and 1 mounted on frame

Ground Pressure    
24 in. Triple Semi-Grouser Shoes 7.40 psi (51 kPa)
28 in. Triple Semi-Grouser Shoes 6.53 psi (45 kPa)
32 in. Triple Semi-Grouser Shoes 5.80 psi (kPa)

Capacities      
Fuel Tank 100 gal. (380 L)
Cooling System 26.4 qt. (25 L)
Engine Oil with filter 24 qt. (23 L)
Hydraulic Tank 34.3 gal. (130 L)
Hydraulic System 63.4 gal. (240 L)
Gearbox
   Swing
   Propel (each)
   Pump Drive

6.6 qt. (6.2 L)
7.2 qt. (6.8 L)
1.7 qt. (1.6 L)

Operating Weights  
Full Fuel Tank, 1.04 cu. yd., 42 in., 1,430 lb. Bucket, 9 ft. 7 in. Arm, 16,490 lb. Counterweight, 32 in. triple semi-grouser shoes, and 175 lb. Operator 56,167 lb. (25 500 kg)


Operating Weights 7 ft. 11 in. Arm 9 ft. 7 in. Arm
Arm Digging Force SAE 29,901 lb. (133 kN) 24,730 lb. (110 kN)
Bucket Digging Force 31,700 lb. (141 kN) 31,700 lb. (141 kN)
Lifting Capacity Over Front at Ground Level 20 ft. Reach 15,112 lb. (6855 kg) 15,504 lb. (7032 kg)
A) Maximum Reach 31 ft. 7 in. (9.62 m) 33 ft. 2 in. (10.11 m)
A') Maximum Reach @ Ground Level 30 ft. 10 in. (9.40 m) 32 ft. 6 in. (9.90 m)
B) Maximum Digging Depth 20 ft. 1 in. (6.12 m) 21 ft. 9 in. (6.62 m)
B') Maximum Digging Depth at 8 ft. Flat Bottom 19 ft. 3 in. (5.87 m) 21 ft. 0 in. (6.41 m)
C) Maximum Cutting Height 35 ft. 5 in. (10.79 m) 36 ft. 10 in. (11.22 m)
D) Maximum Dumping Height 25 ft. 9 in. (7.86 m) 29 ft. 3 in. (8.92 m)
E) Minimum Swing Radius 8 ft. 11 in. (2.72 m) 7 ft. 10 in. (2.38 m)
F) Maximum Vertical Wall 17 ft. 0 in. (5.19 m) 19 ft. 1 in. (5.81 m)
G) Tail Swing Radius 5 ft. 6 in. (1.68 m) 5 ft. 6 in. (1.68 m)




Machine Dimension 7 ft. 11 in. Arm 9 ft. 7 in. Arm
A) Overall Length 30 ft. 5 in. (9.27 m) 29 ft. 11 in. (9.11 m)
B) Overall Height 10 ft. 7 in. (3.23 m) 9 ft. 9 in. (2.98 m)
C) Rear-End Length/Swing Radius 5 ft. 6 in. (1.68 m)
D) Distance Between Idler/Sprocket Centerline 12 ft. 0 in. (3.66 m)
E) Undercarriage Length 14 ft. 8 in. (4.46 m)
F) Counterweight Clearance 3 ft. 3 in. (990 mm)
G) Upperstructure Width 9 ft. 9 in. (2.97 m)
H) Cab Height 9 ft. 10 in. (2.99 m)
I) Track Width with Triple Semi-Grouser Shoes 24 in. / 28 in. / 32 in.
J) Gauge Width 7 ft. 10 in. (2.39 m)
K) Ground Clearance 17.712 in. (450 mm)
L) Width with Triple Semi-Grouser Shoes
24 in.
28 in.
32 in.

9 ft. 10 in. (2.99 m)
10 ft. 2 in. (3.09 m)
10 ft. 6 in. (3.19 m)


Erb Equipment Phone Numbers