Features & Specs
  • Interim Tier 4 certified engine
  • "Load-and-go" versatility
  • Powerwise III management system
  • Cool-on-demand variable speed fan
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.

Horsepower 121
Max Digging Depth 21 ft. 7 in.
Fuel Tank Capacity 84.5 gal.
Fuel Consumption 2.6-4.2 gal/hr
Weight 44,500 lbs
Width 9 ft 10 in
Transport Length 29 ft 8 in
Height 11 ft 1 in


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 318EL


John Deere 180G LC Excavator

Engine
Manufacture and Model John Deere PowerTech PVX
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IV
Net Rated Power 121 hp (90 kW) @ 2,200 rpm
Displacement 275 cu. in. (4.5 L)
Aspiration Turbocharged, air-to-air charge-air cooler

Powertrain    
Maximum Travel Speed  
Low 2.1 mph (3.3 km/h)
High 3.3 mph (5.3 km/h)

Electrical    
Batteries 2 x 12 volt
Alternator Rating 100 amp
Work Lights 2 halogen: 1 mounted on boom and 1 mounted on frame

Ground Pressure    
24 in. Triple Semi-Grouser Shoes 5.95 psi (41 kPa)
28 in. Triple Semi-Grouser Shoes 5.22 psi (36 kPa)
32 in. Triple Semi-Grouser Shoes 4.64 psi (32 kPa)

Capacities      
Fuel Tank 84.5 gal. (320 L)
Cooling System 24.8 qt. (23.5 L)
Engine Oil with filter 15 qt. (14.5 L)
Hydraulic Tank 33 gal. (125 L)
Hydraulic System 55.5 gal. (210 L)
Gearbox
   Swing
   Propel (each)
   Pump Drive

6.6 qt. (6.2 L)
7.2 qt. (6.8 L)
1.0 qt. (0.9 L)

Operating Weights  
Full Fuel Tank, 1.09 cu. yd., 42 in., 1,731 lb. Bucket, 10 ft. 6 in. Arm, 8,620 lb. Counterweight, 28 in. triple semi-grouser shoes, and 175 lb. Operator 44,317 lb. (20 120 kg)



Operating Weights 8 ft. 10 in. Arm 10 ft. 6 in. Arm
Arm Digging Force SAE 20,496 lb. (91 kN) 18,240 lb. (81 kN)
Bucket Digging Force 25,311 lb. (113 kN) 25,311 lb. (113 kN)
Lifting Capacity Over Front at Ground Level 20 ft. Reach 11,656 lb. (5287 kg) 11,690 lb. (5302 kg)
A) Maximum Reach 30 ft. 11 in. (9.43 m) 32 ft. 7 in. (9.94 m)
A') Maximum Reach @ Ground Level 30 ft. 5 in. (9.27 m) 32 ft. 1in. (9.79 m)
B) Maximum Digging Depth 21 ft. 7 in. (6.57 m) 23 ft. 2 in. (7.07 m)
B') Maximum Digging Depth at 8 ft. Flat Bottom 20 ft. 9 in. (6.32 m) 22 ft. 6 in. (6.87 m)
C) Maximum Cutting Height 30 ft. 10 in. (9.40 m) 32 ft. 1 in. (9.79 m)
D) Maximum Dumping Height 21 ft. 7 in. (6.57 m) 22 ft. 9 in. (6.93 m)
E) Minimum Swing Radius 10 ft. 3 in. (3.13 m) 10 ft. 3 in. (3.13 m)
F) Maximum Vertical Wall 18 ft. 3 in. (5.55 m) 20 ft. 7 in. (6.28 m)
G) Tail Swing Radius 8 ft. 4 in. (2.55 m) 8 ft. 4 in. (2.55 m)




Machine Dimension 8 ft. 10 in. Arm 10 ft. 6 in. Arm
A) Overall Length 29 ft. 8 in. (9.04 m) 29 ft. 8 in. (9.04 m)
B) Overall Height 10 ft. 1 in. (3.08 m) 11 ft. 1 in. (3.39 m)
C) Rear-End Length/Swing Radius 8 ft. 4 in. (2.55 m)
D) Distance Between Idler/Sprocket Centerline 11 ft. 1 in. (3.37 m)
E) Undercarriage Length 13 ft. 8 in. (4.17 m)
F) Counterweight Clearance 3 ft. 5 in. (1030 mm)
G) Upperstructure Width 8 ft. 2 in. (2.50 m)
H) Cab Height 9 ft. 8 in. (2.95 m)
I) Track Width with Triple Semi-Grouser Shoes 24 in. / 28 in. / 32 in.
J) Gauge Width 7 ft. 3 in. (2.20 m)
K) Ground Clearance 18 in. (450 mm)
L) Width with Triple Semi-Grouser Shoes
     24 in.
     28 in.
     32 in.

9 ft. 2 in. (2.80 m)
9 ft. 6 in. (2.90 m)
9 ft. 10 in. (3.00 m)


Erb Equipment Phone Numbers