Features & Specs
  • Interim Tier 4 certified engine
  • Powerwise III management system
  • Reduced tail swing design
  • Power Boost
  • With John Deere WorkSight™, JDLink™ monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISOR™ Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It’s the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it’s only available from John Deere.

Horsepower 97
Max Digging Depth 19 ft. 7 in.
Fuel Tank Capacity 58 gal.
Fuel Consumption 1.5-3.1 gal/hr
Weight 30,600 lbs
Width 8 ft 10 in
Overall Length 24 ft 3 in
Height 9 ft 2 in


View Current Brochure View Non Current Specs View Used Equipment




Competitive Models
Cat 314E CR
Hitachi ZX135US-5
Volvo ERC145DL
Komatsu PC138USLC-8


John Deere 135G LC Excavator

Engine
Manufacture and Model Isuzu 4JJ1
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IV
Net Rated Power 97 hp (72 kW) @ 2,000 rpm
Displacement 182 cu. in. (3.0 L)
Aspiration Turbocharged, air-to-air charge-air cooler

Powertrain    
Maximum Travel Speed  
Low 2.1 mph (3.4 km/h)
High 3.4 mph (5.5 km/h)

Electrical    
Batteries 2 x 12 volt
Alternator Rating 50 amp
5 2 halogen: 1 mounted on boom, and 1 mounted on frame

Ground Pressure Without Blade With Blade
20 in. Rubber Crawler Pads 6.24 psi (43 kPa) 6.67 psi (46 kPa)
24 in. Triple Semi-Grouser Shoes 5.22 psi (36 kPa) 5.51 psi (38 kPa)
28 in. Triple Semi-Grouser Shoes 4.50 psi (31 kPa) 4.79 psi (33 kPa)

Capacities      
Fuel Tank 58 gal. (220 L)
Cooling System 21.1 qt. (20 L)
Engine Oil with filter 18 qt. (17 L)
Hydraulic Tank 15.9 gal. (60 L)
Hydraulic System 33 gal. (125 L)
Gearbox
   Swing
   Propel (each)

3.4 qt. (3.2 L)
4.2 qt. (4 L)

Operating Weights Without Blade With Blade
Full Fuel Tank, 0.65 cu. yd., 36 in., 913 lb. Bucket, 9 ft. 11 in. Arm, 8,047 lb. Counterweight, and 175 lb. Operator
20 in. Rubber Crawler Pads 30,617 lb. (13 900 kg) 32,819 lb. (14 900 kg)
24 in. Triple Semi-Grouser Shoes 30,176 lb. (13 700 kg) 32,379 lb. (14 700 kg)
28 in. Triple Semi-Grouser Shoes 30,617 lb. (13 900 kg) 32,819 lb. (14 900 kg)


Operating Weights 8 ft. 3 in. Arm 9 ft. 11 in. Arm
Arm Digging Force SAE 14,611 lb. (65 kN) 13,167 lb. (59 kN)
Bucket Digging Force 19,015 lb. (85 kN) 19,015 lb. (85 kN)
Lifting Capacity Over Front at Ground Level 20 ft. Reach 5,950 lb. (2699 kg) 5,900 lb. (2676 kg)
A) Maximum Reach 27 ft. 6 in. (8.38 m) 29 ft. 1 in. (8.86 m)
A') Maximum Reach @ Ground Level 27 ft. 0 in. (8.24 m) 28 ft. 7 in. (8.72 m)
B) Maximum Digging Depth 18 ft. 0 in. (5.49 m) 19 ft. 7 in. (5.98 m)
B') Maximum Digging Depth at 8 ft. Flat Bottom 17 ft. 3 in. (5.27 m) 19 ft. 0 in. (5.79 m)
C) Maximum Cutting Height 30 ft. 6 in. (9.29 m) 31 ft. 9 in. (9.69 m)
D) Maximum Dumping Height 22 ft. 5 in. (6.83 m) 23 ft. 8 in. (7.22 m)
E) Minimum Swing Radius 4 ft. 11 in. (1.49 m) 4 ft. 11 in. (1.49 m)
F) Maximum Vertical Wall 15 ft. 6 in. (4.73 m) 17 ft. 0 in. (5.19 m)
G) Tail Swing Radius 4 ft. 11 in. (1.49 m) 4 ft. 11 in. (1.49 m)




Machine Dimension 8 ft. 3 in. Arm 9 ft. 11 in. Arm
A) Overall Length 24 ft. 2 in. (7.37 m) 24 ft. 3 in. (7.39 m)
B) Overall Height 9 ft. 2 in. (2.79 m) 9 ft. 1 in. (2.78 m)
C) Rear-End Length/Swing Radius 4 ft. 11 in. (1.49 m)
D) Distance Between Idler/Sprocket Centerline 9 ft. 5 in. (2.88 m)
E) Undercarriage Length 11 ft. 9 in. (3.58 m)
F) Counterweight Clearance 33 in. (840 mm)
G) Upperstructure Width 8 ft. 2 in. (2.48 m)
H) Cab Height 9 ft. 2 in. (2.79 m)
I) Track Width with Triple Semi-Grouser Shoes 24 in. / 28 in.
J) Gauge Width 6 ft. 6 in. (1.99 m)
K) Ground Clearance 16 in. (410 mm)
L) Width
 
20 in. Rubber Crawler Pad
  24 in. Triple Semi-Grouser Shoes
  28 in. Triple Semi-Grouser Shoes

8 ft. 2 in. (2.49 m)
8 ft. 6 in. (2.59 m)
8 ft. 10 in. (2.69 m)
M) Blade Lift Height 18 in. (460 mm)
N) Blade Cut Below Grade 21 in. (540 mm)
O) Blade Lift Angle 29 deg.
Blade Length 8 ft. 3 in. (2.51 m)
Blade Height 18 in. (460 mm)
Blade Width
   20 in. Rubber Crawler Pads
   24 in. Triple Semi-Grouser Shoes
   28 in. Triple Semi-Grouser Shoes

8 ft. 6 in. (2590 mm)
8 ft. 6 in. (2590 mm)
8 ft. 10 in. (2690 mm)


Erb Equipment Phone Numbers