| Engine |
| Manufacture and Model |
Liebherr D 936-L A6 |
| Non-Road Emission Standards |
certified to EPA Tier 3 emissions |
|
Net Peak Power (ISO9249) |
247 hp (184 kW) @ 1,600 rpm |
|
Net Peak Torque (ISO9249) |
937 lb. ft. (1270 Nm) @
1,400 rpm |
|
Cylinders |
in-line 6 |
|
Displacement |
641 cu. in. (10.5 L) |
|
Lubrication |
pressure system with full-flow
spin-on filter and integrated oil-to-water cooler |
|
Air Cleaner |
dual stage dry type with safety
element and aspirated precleaner, with in-cab
restriction indicator |
|
Electrical System |
24 volt with 80 amp alternator |
| Transmission |
|
Travel Speeds |
6.8 mph (11 km/h) |
| Capacities |
|
Fuel Tank |
141 gal. (535 L) |
|
Cooling System with Recovery Tank |
16.4 gal. (62 L) |
|
Splitter Drive |
1.5 gal. (5.6 L) |
|
Engine Oil with Filter |
11.4 gal. (43 L) |
|
Final Drive (each) |
5.2 gal. (19.5 L) |
|
Hydraulic/Transmission Reservoir and Filter |
50 gal (189 L) |
| Undercarriage |
950J |
950J LGP |
|
Tracks |
track frame with front
and rear track guides and sprocket guard; features
deep-heat-treated, sealed, and lubricated track links
and through-hardened, sealed, and lubricated rollers for
maximum wear resistance; extreme-duty shoes for severe
applications |
|
Track Gauge |
6 ft. 6 in. (1981 mm) |
7 ft. 2 in. (2184 mm) |
|
Track/Carrier Rollers
(each side) |
7/2 |
8/2 |
|
Chain |
sealed and lubricated |
|
Track Chain Pitch |
8.5 in. (216 mm) |
8.5 in. (216 mm) |
|
Sprocket Segments
(each side) |
5 |
5 |
|
Shoes (each side) |
40 |
43 |
Ground Contact Area
22-in (560 mm) Grouser Width
24-in (610 mm) Grouser Width
26-in (660 mm) Grouser Width
32-in (812 mm) Grouser Width
36-in (914 mm) Grouser Width |
5,203 sq in (33 566 cm2)
5,667 sq in (36 563 cm2)
6,132 sq in (39 560 cm2)
|
8,347 sq in (53 852 cm2)
9,396 sq in (60 616 cm2) |
|
Track Length on Ground |
9 ft 10 in (2997 mm) |
10 ft 11 in (3316 mm) |
|
Oscillation at Front Idler |
5.6 in (141 mm) |
6.2 in (158 mm) |
Ground Pressure
(with blade)
22-in (560 mm)
24-in (610 mm)
26-in (660 mm)
32-in (812 mm)
36-in (914 mm) |
11.0 psi (76 kPa)
10.1 psi (70kPa)
9.3 psi (64 kPa)
|
7.2 psi (50 kPa)
6.5 psi (45 kPa) |
| Operating Weights |
950J LT |
950J LGP |
|
SAE Operating Weight
includes Standard Equipment, Blade, Full Fuel Tank, and
175 lb (79 kg) Operator |
|
|
|
24 in (610 mm) Extreme-Service
Shoes |
56,361 lb (25 565 kg) |
|
|
32 in (812 mm) Extreme-Duty Shoes |
|
59,255 lb (26 877 kg) |
|
Tractor Shipping Weight
Includes Coolant, Lubricants, and 20% Fuel (without
blade or attachments) |
47,933 lb (21 742 kg) |
50,550 lb (22 929 kg) |
|
| Overall Dimensions |
950J |
950J LGP |
|
A) Overall Height Over Cab |
11 ft 3 in (3.43 m) |
11 ft 6 in (3.5 m) |
|
B) Overall Length
(without blade) |
15 ft 3 in (4.66 m) |
15 ft 5 in (4.69 m) |
|
C) Height of Grousers |
2.8 in (71.5 mm) |
2.8 in (71.5 mm) |
|
D) Ground Clearance |
21 in (545 mm) |
21 in (545 mm) |
|
E) Total Width Over Blade-Mounted
Trunnions |
9 ft 10 in (3.0 m) |
11 ft 10 in (3.6 m) |
F) Width with
Extreme-Duty Single Bar Grouser Shoes
22 in (560 mm)
24 in (610 mm)
26 in (660 mm)
32 in (812 mm)
36 in (914 mm) |
8 ft 4 in (2.54 m)
8 ft 6 in (2.59 m)
8 ft 8 in (2.64 m)
|
9 ft 10 in (2.99 m)
10 ft 2 in (3.09 m) |
|
Blade Specs |
|
|
|
Blade Weight with
Standard Cutting Edges and Cupped End Bits without Spill
Guard |
4,835 lb (2193 kg) |
4,996 lb (2266 kg) |
Weight of Push Beams and Tilt
Cylinders
With Mechanical Pitch Adjustment
With Power Pitch |
3,594 lb (1630 kg)
4,023 lb (1825 kg) |
3,708 lb (1682 kg)
4,138 lb (1877 kg) |
|
SAE Capacity |
9.4 cu. yd. (7.19 m3) |
7.9 cu. yd. (6.04 m3) |
|
G) Height |
5 ft 1 in (1.55 m) |
4 ft 3 in (1.3 m) |
|
H) Width |
12 ft 1 in (3.7 m) |
14 ft 9 in (4.5 m) |
|
I) Lifting Height |
4 ft 0 in (1.22 m) |
3 ft 10 in (1.17) |
|
J) Blade Digging Depth |
20 in (511 mm) |
24 in (610 mm) |
|
K) Maximum Blade Pitch Adjustment |
10 deg |
10 deg |
|
L) Maximum Tilt |
37 in (930 mm) |
37 in (933 mm) |
|
M) Overall Length |
19 ft 10 in (6.05 m) |
19 ft 6 in (5.9 m) |
| Rear Ripper |
3-shank
parallelogram ripper with hydraulic pitch adjustment and
2 hole shank positions |
|
Weight |
7,286 lb (3305 kg) |
N) Ripping Depth
Maximum
Minimum |
29 in (749 mm)
18 in (449 mm) |
O) Lifting Height
Maximum
Minimum |
30 in (755 mm)
18 in (459 mm) |
|
P) Overall Length
(attachment raised) |
5 ft 2 in (1.6 m) |
|
P') Overall Length
(attachment lowered) |
6 ft 4 in (1.9 m) |
|
Q) Toolbar Width |
7 ft 2 in (2.2 m) |
|
R) Distance Between Teeth |
3 ft 3 in (1.0 m) |
|
S) Maximum Pitch Adjustment |
25 deg |
|
