John Deere 824K Wheel Loader Specs
 
Engine
Type John Deere PowerTech 6135H
complies with EPA Tier 3 regulations
Cylinders 6
Valves per Cylinder 4
Displacement 824 cu. in. (13.5 L)
Net Peak Power (ISO9249) 333 hp (248 kW) @ 1,500 rpm
Net Peak Torque (ISO9249) 1,194 lb. ft. (1510 Nm) @ 1,200 rpm
Aspiration turbocharged and charge air cooled
Air Cleaner dual element dry type; restriction indicator in cab
Fan Drive hydraulically driven, proportionally controlled, fan aft of coolers
Electrical System 24 volt with 80-amp alternator
Batteries (two 12 volt) 1,400 CCA; reserve capacity: 200 min.

 

Transmission
Travel Speeds
        Gear 1
        Gear 2
        Gear 3
        Gear 4		 Forward
4.6 mph (7.4 km/h)
8.6 mph (13.9 km/h)
13.1 mph (21.2 km/h)
24.9 mph (40.0 km/h)		 Reverse
4.6 mph (7.4 km/h)
8.6 mph (13.9 km/h)
18.7 mph (30.0 km/h)
 

 

Refill Capacities
Fuel Tank (with ground level fueling) 124 gal. (469 L)
Cooling System 50 qt. (47.4 L)
Engine Oil, Including Filter 40 qt. (38 L)
Transmission, Including Filter 30 qt. (28 L)
Differential (front and rear, each axle) 49 qt. (46 L)
Hydraulic Reservoir and Filters 42 gal. (159 L)
Wet-Disc Parking Brake 24 oz. (700 mL)

 
Dimensions (with Pin On Bucket) Standard Z-Bar High-Lift Z Bar
A) Height to Top of Cab 11 ft. 6 in. (3.50 m) 11 ft. 6 in. (3.50 m)
B) Height to Top of Exhaust 10 ft. 2 in. (3100 mm) 10 ft. 2 in. (3100 mm)
C) Ground Clearance 18 ft. 2 in. (0.46 m) 18 ft. 2 in. (0.46 m)
D) Length from Centerline to Front Axle 5 ft. 7 in. (1.70 m) 5 ft. 7 in. (1.70 m)
E) Wheelbase 11 ft. 4 in. (3.46 m) 11 ft. 4 in. (3.46 m)
F) Dump Clearance see below see below
G) Height to Hinge Pin, Fully Raised 14 ft. 9 in. (4.48 m) 14 ft. 9 in. (4.48 m)
H) Dump Reach see below see below
I) Maximum Digging Depth 4.5 in. (115 mm) 7.7 in. (196 mm)
J) Overall Length see below see below
K) Maximum Rollback at Ground Level 46 degrees 46 degrees
L) Maximum Rollback, Boom Fully Raised 52 degrees 53 degrees
M) Maximum Bucket Angle, Fully Raised 44 degrees 40 degrees
 

Standard Z-Bar Information with Pin On Bucket
Bucket Type/Size General Purpose
w/ Bolt on Edge		 Light Material
w/ Bolt on Edge
Capacity, Heaped SAE 6.0 cu. yd. (4.6 m3) 6.75 cu. yd. (5.2 m3)
Capacity, Struck SAE 5.25 cu. yd. (4.0 m3) 5.8 cu. yd. (4.4 m3)
Bucket Weight 6,146 lb (2788 kg) 6,411 lb (2908 kg)
Bucket Width 10 ft. 9 in. (3.27 m) 10 ft. 9 in. (3.27 m)
Breakout Force, SAE J732C 41,678 lb (18 905 kg) 38,572 lb (17 496 kg)
Tipping Load, Straight 45,213 lb (20 508 kg) 44,590 lb (20 226 kg)
Tipping Load, 35-Degree Turn, SAE 40,236 lb (18 251 kg) 38,195 lb (17 325 kg)
Tipping Load, 40-Degree Full Turn, SAE 38,775 lb (17 588 kg) 39,649 lb (17 984 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 6 ft. 9 in. (2.05 m) 6 ft. 10 in. (2.09 m)
Reach, 45-Degree Discharge, Full Height 4 ft. 2 in. (1.28 m) 4 ft. 6 in. (1.36 m)
Dump Clearance, 45-Degree  Full Height 10 ft. 6 in. (3.19 m) 10 ft. 3 in. (3.12 m)
Overall Length, Bucket on Ground 30 ft. 5 in. (9.26 m) 30 ft. 9 in. (9.38 m)
Loader Clearance Circle, Bucket in Carry Position 46 ft. 9 in. (14.26 m) 46 ft. 8 in. (14.22 m)
Operating Weight 57,783 lb (26 210 kg) 58,047 lb (26 330 kg)

 

High-Lift Z-Bar Pin-On Type Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 6.0 cu. yd. (4.6 m3)
Capacity, Struck SAE 5.25 cu. yd. (4.0 m3)
Bucket Weight 6,146 lb (2788 kg)
Bucket Width 10 ft. 9 in. (3.27 m)
Breakout Force, SAE J732C 39,570 lb (17 949 kg)
Tipping Load, Straight 37,983 lb (17 229 kg)
Tipping Load, 35-Degree Turn, SAE 33,658 lb (15 267 kg)
Tipping Load, 40-Degree Full Turn, SAE 32,386 lb (14 690 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 8 ft. 2 in. (2.50 m)
Reach, 45-Degree Discharge, Full Height 5 ft. 4 in. (1.63 m)
Dump Clearance, 45-Degree  Full Height 11 ft. 11 in. (3.63 m)
Overall Length, Bucket on Ground 32 ft. 1 in. (9.77 m)
Loader Clearance Circle, Bucket in Carry Position 47 ft. 9 in. (14.54 m)
Operating Weight 58,618 lb (25 689 kg)
 
Click Here to download full brochure
 

 

Contact Us    Site Map