|
|
|
|
|
|
|
John
Deere 410J Backhoe Specs
|
| Engine |
| Manufacture and Model |
John Deere
PowerTech 4045T
turbocharged standard |
| Non-Road Emission Standards |
certified to EPA
Tier 2 emissions |
| Displacement |
276 cu. in. (4.5
L) |
| Net Peak Power (ISO9249) |
96 hp (72 kW) @ 2,000 rpm |
| Hydraulics |
| Main Pump |
pressure-compensated load sensing
(PCLS) axial piston |
Pump Flow @ 2,200 rpm
Backhoe
Loader |
42 gpm (159 L/min.)
42 gpm (159 L/min.) |
System Relief Pressure
Backhoe
Loader |
3,625 psi (24 993 kPa)
3,625 psi (24 993 kPa) |
| Electrical |
| Voltage |
12 volt |
| Alternator Rating |
90 amp |
| Tires |
Front |
Rear |
| Mechanical-Front-Wheel Drive |
12.5/80-18 I-3 (10) |
21L-24 R-4
(10) |
| Serviceability |
| Hydraulic Oil Filter, Spin-On
Enclosed Replaceable Element, Vertically Mounted |
6-micron
filtration / 1,000 service hours |
|
Refill Capacities |
|
| Cooling System |
22
qt. (21 L) |
| Rear Axle |
19
qt. (18 L) |
| Engine Oil (including vertical
spin-on filter) |
14
qt. (13 L) |
| Torque Converter and
Transmission |
16
qt. (15 L) |
| Fuel Tank (with
ground-leveling fueling) |
41
gal. (155 L) |
| Hydraulic System |
25
gal. (95 L) |
| Hydraulic Reservoir |
10.2 gal. (39 L) |
Mechanical-Front-Wheel-Drive
Housing
Axle
Planetary (each) |
7 qt. (6.5 L)
1 qt. (1 L) |
| Operating Weights |
| With Full Fuel Tank, 175-lb.
(79 kg) Operator, and Standard Equipment |
15,000 lb. (6803 kg) |
Typical with Cab,
Mechanical-Front-Wheel Drive
Extendable Dipperstick, and 1,000-lb.
(454 kg) Counterweight |
18,500 lb. (8390 kg) |
|
Optional
Components |
|
| Cab |
580
lb. (263 kg) |
| Mechanical-Front-Wheel Drive
with Trans |
485
lb. (220 kg) |
| Extendable Dipperstick |
638
lb. (289 kg) |
| Front Loader Coupler |
630
lb. (286 kg) |
| Backhoe Bucket Coupler |
138
lb. (63 kg) |
|
 |
| Overall Dimensions |
| A) Ground Clearance (minimum) |
14 in. (356 mm) |
| B) Overall Length (Transport) |
23 ft.
11 in.
(7.29 m) |
| C) Width over Tires |
7 ft. 2 in.
(2.18 m) |
| D) Height to Top of Rops/Cab |
9 ft.
3 in. (2.82 m) |
E) Length from Axle to Axle
Non-Powered Front Axle
Mechanical-Front-Wheel-Drive Axle |
6 ft. 11 in. (2.11 m)
7 ft. (2.14 m) |
| Backhoe Dimensions / Performance |
Digging Force
Bucket Cylinder
Crowd Cylinder |
14,801 lb. (65.8 kN)
8,741 lb. (38.9 kN) |
| |
With Standard
Backhoe |
With Optional Extendable
DIpperstick |
|
Retracted |
Extended |
| F) Loading Height
(truck loading position) |
12 ft. 6 in. (3.81 m) |
12 ft. 8 in. (3.86 m) |
15 ft. 6 in. (4.72 m) |
| G) Reach from Center of Swing
Pivot |
19 ft. 8 in. (5.99 m) |
19 ft. 11 in. (6.07 m) |
23 ft. 8 in. (7.21 m) |
| H) Reach from Center of Rear
Axle |
23 ft. 4 in. (7.11 m) |
23 ft. 7 in. (7.19 m) |
27 ft. 4 in. (8.33 m) |
| I) Digging Depth (SAE maximum) |
15 ft. 10 in. (4.83 m) |
16 ft. 1 in. (4.90 m) |
20 ft. (6.10 m) |
J) Digging Depth (SAE)
2-ft. (610 mm) Flat Bottom
8-ft. (2440 mm) Flat Bottom |
15 ft. 8 in. (4.78 m)
14 ft. 7 in. (4.45 m) |
15 ft. 11 in. (4.85 m)
14 ft. 11 in. (4.55 m) |
19 ft. 11 in. (6.07 m)
19 ft. 1 in. (5.82 m) |
| K) Stabilizer Width (transport
with Rops) |
7 ft. 7. in. (2.30 m) |
7 ft. 7 in. (2.30 m) |
7 ft. 7 in. (2.30 m) |
| L) Stabilizer Spread (operating) |
11 ft. 4 in. (3.45 m) |
11 ft. 4 in. (3.45 m) |
11 ft. 4 in. (3.45 m) |
| M) Stabilizer Overall Width
(operating) |
13 ft. 3 in. (4.03 m) |
13 ft. 3 in. (4.03 m) |
13 ft. 3 in. (4.03 m) |
| N) Bucket Rotation |
190 deg. |
190 deg. |
190 deg. |
| O) Transport Height |
12 ft. 11 in. (3.94 m) |
12 ft. 10 in. (3.91 m) |
12 ft. 10 in. (3.91 m) |
| Loader Dimensions /
Performance |
| P) Bucket Dump Angle (maximum) |
45
deg. |
| Q) Rollback Angle at Ground
Level |
40
deg. |
| Bucket Capacity |
Heavy-duty 1.50 cu. yd.
(1.15 m3) Bucket |
| Width |
94 in. (2338
mm) |
| Weight |
1,208 lb. (548
kg) |
| Breakout Force |
10,170 lb. (45.2 kN) |
| Lift Capacity (full height) |
7,070 lb. (3210
kg) |
| R) Height to Bucket Hinge Pin
(maximum) |
11 ft.
0 in.
(3.35 m) |
| S) Dump Clearance
(bucket at 45 deg.) |
8 ft.
9 in.
(2.67 m) |
| T) Reach at Full Height
(bucket at 45 deg.) |
31.0 in. (787
mm) |
| U) Digging Depth Below Ground
(bucket level) |
6.2 in. (157
mm) |
V) Length from Front Axle
Centerline to
Bucket Cutting Edge |
6 ft. 8 in.
(2.03 m) |
|
 |
|
Lift Capacity with Quick-Coupler / Forks |
| A') Maximum Height |
4,570 lb. (2073
kg) |
| B') Maximum Reach |
6,971 lb. (3162
kg) |
| C') At Ground Line |
9,138 lb. (4145
kg) |
| D') Below Ground Line |
8.3 in (211
mm) |
|
|
|
|
Click Here to download full brochure |
|
|